Status: Association Status
This screen presents an overview of the MAC address and signal strength (SNR in dBm) of all clients connected to the AP through the Ethernet or wireless.
Super User: Super User
This screen allows you to change the username and password for admin user / end user.
The default username and password are both “super.” After every factory reset, the username and password revert to this combination. The AP doesn’t allow you to set the same username for both admin and super users.
Super User: Firmware Upgrade
This screen allows you to update the firmware (software) in the AP. New firmware is issued to improve the performance and add features to the product. The new firmware will be named “apimg1.” IMPORTANT: Do not change the filename of the new firmware, as new firmware with a filename other than “apimg1” will cause the process to fail.
1.Save the file in your PC.
2.Browse to the file with the name “apimg1” and click “Upload.”
3.Reboot the AP to complete the process.
4.After the reboot, perform a default factory setting.
Super User: Firmware Version
This screen presents info about the firmware version of the device.