Specifications, Standards | Intellinet Network Solutions 503679

specifications

Standards

•IEEE 802.11b (11 Mbps Wireless LAN)

•IEEE 802.11g (54 Mbps Wireless LAN)

•IEEE 802.11g+ (108 Mbps Wireless LAN)

•IEEE 802.3 (10Base-T Ethernet)

•IEEE 802.3u (100Base-TX Fast Ethernet)

•SNMPv1/v2c (Simple Network Management Protocol)

General

•LAN ports: one RJ-45 10/100 Mbps data/PoE port

•FTP pass-through

•VPN pass-through support: IPSec, PPTP, L2TP

Management Options

•Configuration methods: HTTP, SNMP and Telnet

•General configuration options:

-Frequency: channel frequency step size = 5 MHz

-Bandwidth

-Automatically associate to WAP with identical ESSID

-Seamless roaming

-IP address (DHCP and static IP)

-Firmware upgrade on the fly

-Two-level password security (administrator and super user level)

Wireless

•Wireless frequency range: 2.400 – 2.4835 GHz

•Modulation technologies:

-802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK

-802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM

•Channels:

-USA & Canada: 12 channels

-Europe: 13 channels

-Japan: 14 channels

•Data rates:

-IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)

-IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)

•Output power: max. 20 dBm

•Receiver sensitivity: -73 dBm (54 Mbps); -87 dBm (11 Mbps)

•Maximum coverage distance: 5 km (3 mi.) in Bridge Point to Point mode

•Wireless security:

-WEP encryption (64/128/152 bit)

-WPA (TKIP and AES)

-802.1x support in AP mode

-Client access control through media access control (MAC) filter

-Disable/enable ESSID broadcast

•Wireless operation modes: Access Point, Repeater, Bridging and AP Client

•Maximum wireless user connections: 50

•Antenna:

-Integrated 9 dBi panel antenna, beam width 45° vertical, 45° horizontal

-N-type connector for external high-gain antenna

SPECIFICATIONS 21