On Demand is only effective for Disconnect PPP session if idle time is longer than _ Min.
Connect Manually: With this option, users have to connect with the Internet manually after disconnection. This option is only effective with Disconnect PPP session if idle time is longer than _ Min.
Prevent reconnection although no response from PPP server: This option is for shutting off the router’s internal automatic
4.3 Dynamic IP (Cable Modem) Configuration
With this connection option, the router can get IP addresses automatically from an ISP. It is suitable for connection options such as cable modem, LAN and so on.
1.Turn on the external cable modem and check the WAN LED of the router. If the WAN LED is off, confirm that the network cable connection between the modem and the WAN port is correct.
2.Click “Basic Setup” ➝ “WAN Setup.”
3.Choose DHCP User (Cable modem, VDSL, LAN, …)
4.Click “Apply” to complete.
5. You will see the following
If Conn. State shows “Successfully connected,” the configuration is correct. Click “Show Internet Information” and proceed to section 4.5.1.
20