Intellinet Network Solutions 523615 manual

Page 9

6.Click the “General” tab; select “Obtain an IP address automatically” and “Obtain DNS server address automatically.”

7.Click “OK.”

8.Click ”Start” “Run.”

9.Input ”cmd”; then click “OK.”

10.Input “ipconfig” in the pop-up command window.

NOTE: Make sure your IP is the same as that listed below. If it’s the same, then your configuration is successful. If not, redo the above steps and restart your computer.

9

Image 9
Contents INT-523608/523615-UM-0307-02 Table of Contents Introduction FeaturesInstallation Before InstallationIndicators and Connections 2.3.1 Model 523608, 4-Port IndicationPort/Jack Indication Model 523615, 8-Port ResetWindows 2000 Setup Page Page Page Windows XP Setup Page Page Page Start Internet Explorer to Log Input ping 192.168.10.1, then EnterPPPoE Configuration Page Page Other configuration options of the PPPoE WAN setup screen Page Page Static IP Configuration Other configuration optionsPage Status WAN Status LAN Status Basic Setup 4.6.1 WAN Setup LAN Setup Page Link Setup/Info Picture showing 4 Port Version Routing Table for advanced users only System Administrator Setup Switch ConfigurationPage Upgrade procedure Firmware UpgradePage System Log Setup System LogSystem Log History Miscellaneous Configurations Access ListConfig Mgmt/Restart QoS Basic Setup IP QoS Application QoS Ports QoS NAT Applications Setup MethodPage Click NAT Internal Server Internal ServerPptp Protocol ServerPort Forwarding Port Trigger Internal Port RangeNAT On/Off Advanced Setup Firewall Click Advanced Ddns as follows DdnsClick Advanced WOL WOL Wake-on LANURL Filter Remote Management Setup Method Click Advanced VPN Setup VPN SetupStandards GeneralRouter Power LEDsEnvironmental