Intellinet Network Solutions 523615 manual Indicators and Connections 2.3.1 Model 523608, 4-Port

straight-through or cross cable can be used to connect the LAN card or switch.

3.Turn on the power by pressing the power button on the back of the router. The device will perform a self test. During the self test, the PWR LED, CPU/RUN LED and LAN port LEDs of connected ports are lit. After the self test, the CPU/RUN LED starts flashing (on-off-on-off).

4.Start the computer.

2.3Indicators and Connections 2.3.1 Model 523608, 4-Port

LED	Indication
PWR	Continuously lit indicates power to the router.

RUN/CPU Slowly blinking indicates the system is operational after a proper startup.

WAN	Blinking indicates data is being transmitted to/from the Wide Area
	Network.
1–4	Blinking indicates data is being transmitted to/from the Local Area
	Network.

Port/Jack Indication

DC 5 V	Connects to the power adapter.
Reset	This can be to restart the router, but all configurations that may have
	been entered will be restored to the original factory defaults.
WAN	Connects xDSL/cable modem or special cable.
1–4	The LAN ports connect to PCs, hubs, switches and so on.

5