Login Account Setup: Enter your old ID and password and the new values. Click “Apply” to save the changes. The default Login ID is “root”; the default password is blank (no password).
Admin
NOTE: It is strongly recommended that you change the administrator username and password during the initial setup. Failing to do so will allow any user to access the router’s administrator menu and change the configuration.
NOTE: If wantto restore the factory default values, turn offthe router,press the Reset button on the the device, and turn on the router while keeping the Reset button pressed. About 5 seconds later, the RUN LED will flash rapidly and you can then release the button.Once the startup sequence is complete, all configuration data will be restored to the default configuration.
33