JBM electronic C-130 quick start Specifcations

			HARDWARE STATUS LEDS
Power:	Yellow – Power Connection Status (PWR)
	ON		Power is being received by the C130
	OFF		Power is not being received by the C130
Ethernet Ports:	Green – LAN Connection Status (LINK)
	ON		C130 is connected to LAN
	OFF		C130 is not connected to the LAN, or the C130 is in the process of being reset
	RED – Data Transmit Activity Status (T)
	ON-OFF-ON (Flickering)		C130 is transmitting packets
	Green – Data Receive Activity Status (R)
	ON-OFF-ON (Flickering)		C130 is receiving packets
RS232 Ports:	Green – Data Receive Activity Status (RD)
(Async)	ON-OFF-ON (Flickering)		C130 is receiving packets
	Red – Data Transmit Activity Status (TD)
	ON-OFF-ON (Flickering)		C130 is transmitting packets
Card Bus:	Yellow – Activity (ACT)
	ON	Card negotiation with Bus in C130

SPECIFCATIONS

Console Port:	Baud Rate:
	Interface:
Ethernet Ports:	Mbps:
	Interface:
RS232 Ports:	Interface:
(Async)

110-115,200 bps

One Female DB-9, RS-232C DCE 10/100BaseT

Two Female RJ-45 connectors

Type II Connector, 3.3V or 5V, 16 bit PC Cards or 32 bit Card Bus

Linux 2.6 Kernel

RS232C Port: (Sync)

Console

Port:

IP Protocol

CLI Access through async connection SNMP, HTTP/S, Telnet, SSH

Card Bus:	12V DC (External) 120 VAC 60Hz or 120-240 VAC 50/60Hz
Operating System:	Size:	7” W x 2.5” H x 8” L
Management:	Weight:	2 pounds
	486DX-100
Power:	32 MB RAM, 16MB Flash
Physical:	1 Year Parts and Labor

Page -17-

Copyright ©2007 JBM Electronics, Inc.