Minimal Reception
On occasion, you can find yourself in a situation where you have just enough signal to be able to communicate with the cellular tower, and obtain an IP address, but not enough reception to be able to sustain a viable connection.
If your cellular card is using dynamically assigned IP addresses, you can determine if you are in a situation like this by watching the “Current Interface Address” and “Current Peer Address” fields in the screen below:
If you refresh this screen every few minutes and notice that the “Current Interface Address” is changing frequently, it is very possible that your device is connecting to the network and obtaining and IP address, and then the connection to the cellular network is being dropped. When the connection is
In this situation an external antenna can boost the signal enough to provide a sustainable cellular connection.
Authentication Issues
If you are using a GPRS/EDGE/HSDPA card, and have at least three LEDs of signal on the front panel signal meter, your radio connection to the network may be just fine. The problem may lie in logging onto the cellular network.
Return to the screen shown below:
Page
Copyright ©2007 JBM Electronics, Inc.