Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server manual

Page 14

Print Server Administration User’s Guide

To set the print server’s password,

1.Select the print server in the EtherP Admin main window’s server name display (or extended server display).

2.Choose Server Device... from the Configuration menu, or press the Configure Server button in the toolbar. (If you have already assigned a password to the server, you will have to enter it at this point.) EtherP Admin will display the Server Device Configuration window.

3.In the Password field, enter the password you have chosen for the server, and press OK.

4.EtherP Admin will ask you to confirm your new password. Enter the password a second time and press OK.

5.Choose Save Configuration from the Configuration menu, or press the Save Configuration button on the toolbar. This will store the new settings into the print server and restart it.

WARNING: Do not forget or lose your print server password. If you forget it, you will have to contact your service representative to change the password.

Changing Print Server Port Settings

Your HyperNet Fastprint network print server provides a number of parallel and/or serial printer ports. For each port, you can determine:

The name of the port

A comment describing the port

For parallel ports,

◊ Whether or not data can be sent to the port at high speed

8

EtherP Admin Administration

Image 14
Contents Administration Guide Trademarks Table of Contents Setting UP Appletalk Printing Setting an IP Address without EtherP Admin Page About This Guide What Isnt Covered in This User’s Guide?Contents of the User’s Guide IntroductionPrint Server Administration User’s Guide HyperNet Fastprint Print Server Administration Features System Requirements Installing and Starting the EtherP Admin ProgramInstalling EtherP Admin Starting EtherP Admin Getting Started Setting up Your Print Server Choosing a Name for Your Print ServerSetting a Password for Your Print Server Changing Print Server Port Settings EtherP Admin Administration Port Name See above Description See above Introduction to Novell NetWare Printing Testing Your Print ServerSetting up Novell NetWare 3.x Printing Print Server Administration User’s Guide Setting up as a NetWare Print Server Print Server Administration User’s Guide Setting up as a NetWare Remote Printer Printing from Client Workstations Windows 95 Client Workstations\\SERVER\Q-LJ5L Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows 3.x and Windows for Workgroups 3.11 Workstations NetWare Settings MS-DOS/PC-DOS WorkstationsPrint Server Administration User’s Guide Setting up Novell NetWare 4.x Printing NetWare Directory ServicesSetting up as a NetWare Print Server EtherP Admin Administration Setting up as a NetWare Remote Printer Windows 95 Workstations Windows NT 4.0 and later Client Workstations Windows 3.1 and Windows for Workgroups 3.11 Workstations Setting up Microsoft Network Printing Setting up the Print Server for Microsoft Networking \\PS-142634\DJ-660C \\PS-142634\PS-142634-P2 Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows for Workgroups Client Workstations \\PS-142634\PS-142634-P1 Keeping the Print Queue on a Windows NT Server EtherP Admin Administration Setting up AppleTalk Printing Choose Create Printer... from the Printer menuSetting up the Print Server for AppleTalk Printing Choose AppleTalk Protocol... from the Configuration menuPrinting from MacOS Client Workstations Setting up Unix TCP/IP Printing Configuring TCP/IP Network SettingsChoose TCP/IP Protocol... from the Configuration menu Allowing SNMP-based ManagementSetting up Snmp Traps Printing Text Files from UnixPrinting from BSD Unix Versions Printing from SCO Unix System V/386 Answer y and press Enter to continue Script will askPrinting from Solaris Printing from Windows NT Printing using Tftp Ftp ip-address EtherP Admin Administration EtherP Admin Main WindowFiltering the List of Print Servers Press the Define Filter Strings buttonWorking with Environment Files and Preferences Monitoring Printer Status Checking NetWare Print Jobs Configuring NetWare Print Services Managing Print QueuesPrint Server Administration User’s Guide Managing Printers Managing Print Servers Resetting the Print Server Select Reset or Factory Reset from the Tools menuUpgrading the Print Server’s Internal Firmware Troubleshooting Print Server Problems Using the EtherP Admin Device Diagnostics WindowAppendix Telnet Interface Administration Setting an IP Address without EtherP AdminAccessing the Telnet Interface Changing TCP/IP SettingsSnmp Community Commumity Name Public Community Access Changing Server Settings Changing the Print Server Password Changing Port Settings Changing AppleTalk Settings Displaying Configuration Information NetwareUpgrading Print Server Firmware Index Print Server Administration User’s Guide Tools menu Product Warranty