Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server Windows 95 Workstations

Page 33

Print Server Administration User’s Guide

2.Make sure that the NetWare protocol is enabled in the server. This setting is found in the Server Device Configuration window, accessible by selecting the print server and choosing Server Device... from the Configuration window.

3.Make sure you have a NetWare print server created and running on your NetWare file server. Consult your NetWare documentation for instruction on how to do this.

4.Choose NetWare Protocol... from the EtherP Admin Configuration menu, or click the Configure NetWare button in the toolbar. Click on the Remote Printer tab.

5.Click on the port number button corresponding to the port you will be using for remote printer service.

6.Click on the NDS Remote Printer selection. EtherP Admin will display the tree structure of the NetWare NDS contexts accessible from your network.

7.Enter the name of the context you will be using, and enter the name of the print server in that context.

8.Determine what printer numbers are available on the given print server, and enter an unused printer number in the Printer Number field. Printer numbers can range from 0 to 15.

9.Click OK, then choose Save Configuration from the Configuration menu (or press the Save Configuration toolbar button) to change the settings in the print server. The print server will restart itself and begin serving as a remote printer for the specified print server.

Printing from Client Workstations

Once your print server is set up for printing from the file server, your network’s client workstations can connect to the file server’s print queue.

Windows 95 Workstations

Unless you are using the 32-bit NetWare requester from Novell, Windows 95 does not directly support NDS access. You can access NetWare 4.x printer queues using bindery emulation, as described on page 16 of this manual.

EtherP Admin Administration

27

Image 33

Contents Administration Guide Trademarks Table of Contents Setting UP Appletalk Printing Setting an IP Address without EtherP Admin Page Contents of the User’s Guide What Isnt Covered in This User’s Guide?About This Guide IntroductionPrint Server Administration User’s Guide HyperNet Fastprint Print Server Administration Features Installing and Starting the EtherP Admin Program Installing EtherP AdminSystem Requirements Starting EtherP Admin Choosing a Name for Your Print Server Getting Started Setting up Your Print ServerSetting a Password for Your Print Server Changing Print Server Port Settings EtherP Admin Administration Port Name See above Description See above Testing Your Print Server Setting up Novell NetWare 3.x PrintingIntroduction to Novell NetWare Printing Print Server Administration User’s Guide Setting up as a NetWare Print Server Print Server Administration User’s Guide Setting up as a NetWare Remote Printer Windows 95 Client Workstations Printing from Client Workstations\\SERVER\Q-LJ5L Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows 3.x and Windows for Workgroups 3.11 Workstations MS-DOS/PC-DOS Workstations NetWare SettingsPrint Server Administration User’s Guide NetWare Directory Services Setting up Novell NetWare 4.x PrintingSetting up as a NetWare Print Server EtherP Admin Administration Setting up as a NetWare Remote Printer Windows 95 Workstations Windows NT 4.0 and later Client Workstations Windows 3.1 and Windows for Workgroups 3.11 Workstations Setting up Microsoft Network Printing Setting up the Print Server for Microsoft Networking \\PS-142634\DJ-660C \\PS-142634\PS-142634-P2 Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows for Workgroups Client Workstations \\PS-142634\PS-142634-P1 Keeping the Print Queue on a Windows NT Server EtherP Admin Administration Choose Create Printer... from the Printer menu Setting up AppleTalk PrintingChoose AppleTalk Protocol... from the Configuration menu Setting up the Print Server for AppleTalk PrintingPrinting from MacOS Client Workstations Configuring TCP/IP Network Settings Setting up Unix TCP/IP PrintingAllowing SNMP-based Management Choose TCP/IP Protocol... from the Configuration menuPrinting Text Files from Unix Setting up Snmp TrapsPrinting from BSD Unix Versions Answer y and press Enter to continue Script will ask Printing from SCO Unix System V/386Printing from Solaris Printing from Windows NT Printing using Tftp Ftp ip-address EtherP Admin Main Window EtherP Admin AdministrationPress the Define Filter Strings button Filtering the List of Print ServersWorking with Environment Files and Preferences Monitoring Printer Status Checking NetWare Print Jobs Managing Print Queues Configuring NetWare Print ServicesPrint Server Administration User’s Guide Managing Printers Managing Print Servers Select Reset or Factory Reset from the Tools menu Resetting the Print ServerUpgrading the Print Server’s Internal Firmware Using the EtherP Admin Device Diagnostics Window Troubleshooting Print Server ProblemsSetting an IP Address without EtherP Admin Appendix Telnet Interface AdministrationChanging TCP/IP Settings Accessing the Telnet InterfaceSnmp Community Commumity Name Public Community Access Changing Server Settings Changing the Print Server Password Changing Port Settings Changing AppleTalk Settings Netware Displaying Configuration InformationUpgrading Print Server Firmware Index Print Server Administration User’s Guide Tools menu Product Warranty