Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server manual

Page 47

Print Server Administration User’s Guide

Setting up the Print Server for AppleTalk Printing

To set up your print server so that it can be used for AppleTalk printing:

1.Make sure the AppleTalk protocol is enabled. The AppleTalk check box in the Server Device Configuration window needs to be checked. Select the print server and choose Server Device... from the Configuration menu to display this window.

2.Choose AppleTalk Protocol... from the Configuration menu.

3.If your AppleTalk network is divided into AppleTalk zones, you will have to specify which zone the print server should be in. You should locate the print server in the same zone as most of the users who will be using it.

If your network is not divided into zones, the AppleTalk Zone field should contain a single asterisk “*”.

4.For each printer port that will be used for AppleTalk printing, you may need to change the AppleTalk port setttings. Press the appropriate Port Setting button to open the AppleTalk Port Configuration dialog window.

EtherP Admin will display the port’s Chooser Name (which is the same as the port name) and allow you to change the port’s settings:

EtherP Admin Administration

41

Image 47

Contents Administration Guide Trademarks Table of Contents Setting UP Appletalk Printing Setting an IP Address without EtherP Admin Page Introduction What Isnt Covered in This User’s Guide?Contents of the User’s Guide About This GuidePrint Server Administration User’s Guide HyperNet Fastprint Print Server Administration Features System Requirements Installing and Starting the EtherP Admin ProgramInstalling EtherP Admin Starting EtherP Admin Choosing a Name for Your Print Server Getting Started Setting up Your Print ServerSetting a Password for Your Print Server Changing Print Server Port Settings EtherP Admin Administration Port Name See above Description See above Introduction to Novell NetWare Printing Testing Your Print ServerSetting up Novell NetWare 3.x Printing Print Server Administration User’s Guide Setting up as a NetWare Print Server Print Server Administration User’s Guide Setting up as a NetWare Remote Printer Windows 95 Client Workstations Printing from Client Workstations\\SERVER\Q-LJ5L Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows 3.x and Windows for Workgroups 3.11 Workstations MS-DOS/PC-DOS Workstations NetWare SettingsPrint Server Administration User’s Guide NetWare Directory Services Setting up Novell NetWare 4.x PrintingSetting up as a NetWare Print Server EtherP Admin Administration Setting up as a NetWare Remote Printer Windows 95 Workstations Windows NT 4.0 and later Client Workstations Windows 3.1 and Windows for Workgroups 3.11 Workstations Setting up Microsoft Network Printing Setting up the Print Server for Microsoft Networking \\PS-142634\DJ-660C \\PS-142634\PS-142634-P2 Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows for Workgroups Client Workstations \\PS-142634\PS-142634-P1 Keeping the Print Queue on a Windows NT Server EtherP Admin Administration Choose Create Printer... from the Printer menu Setting up AppleTalk PrintingChoose AppleTalk Protocol... from the Configuration menu Setting up the Print Server for AppleTalk PrintingPrinting from MacOS Client Workstations Configuring TCP/IP Network Settings Setting up Unix TCP/IP PrintingAllowing SNMP-based Management Choose TCP/IP Protocol... from the Configuration menuPrinting Text Files from Unix Setting up Snmp TrapsPrinting from BSD Unix Versions Answer y and press Enter to continue Script will ask Printing from SCO Unix System V/386Printing from Solaris Printing from Windows NT Printing using Tftp Ftp ip-address EtherP Admin Main Window EtherP Admin AdministrationPress the Define Filter Strings button Filtering the List of Print ServersWorking with Environment Files and Preferences Monitoring Printer Status Checking NetWare Print Jobs Managing Print Queues Configuring NetWare Print ServicesPrint Server Administration User’s Guide Managing Printers Managing Print Servers Select Reset or Factory Reset from the Tools menu Resetting the Print ServerUpgrading the Print Server’s Internal Firmware Using the EtherP Admin Device Diagnostics Window Troubleshooting Print Server ProblemsSetting an IP Address without EtherP Admin Appendix Telnet Interface AdministrationChanging TCP/IP Settings Accessing the Telnet InterfaceSnmp Community Commumity Name Public Community Access Changing Server Settings Changing the Print Server Password Changing Port Settings Changing AppleTalk Settings Netware Displaying Configuration InformationUpgrading Print Server Firmware Index Print Server Administration User’s Guide Tools menu Product Warranty