Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server manual Index

Page 79

Print Server Administration User’s Guide

To perform the download:

1.Make sure you have backup copies of the previous version of the firmware image files before overwriting them with the new ones.

2.Place the two firmware image files in the root of your TFTP server directory. (On some versions of the UNIX operating system, the TFTP server directory is found in /tftpboot.)

3.Connect to the print server using telnet, and select Tools from the Main Menu.

4.Choose Download Firmware. The print server will display the Download Firmware menu.

[Download Firmware]

1 - TFTP Server IP Address <0.0.0.0>

2 - Download

0 - Return to Tools Menu

Enter Selection:

5.Choose the TFTP Server IP Address selection. Enter the IP address of the system you have designated as the TFTP server. For example:

Input TFTP Server IP Address: 203.69.140.234

6.Choose the Download selection. Provided all files are set up correctly, the print server will download the .DWL file, reset itself (closing the telnet connection), and begin downloading the .BIN file. When this is complete, the print server will restart, using the updated version of the firmware.

WARNING: When downloading the image file, be very careful not to interrupt the transfer by powering down the print server or disconnecting it from the network. The print server should be able to recover from an interrupted transfer in most cases, provided the TFTP server remains available. However, in some situations it may be necessary to return your print server for servicing in order to recover from an interrupted download.

Index

AppleTalk zone, 72	options, 38
ARP (address resolution protocol), 114	carriage return/linefeed translation, 80
arp command, 114	Communication Retries, 96
authentication trap, 78	Communication Timeout, 96
banner, NetWare print job, 38	community name, 78
baud rate	Configuration menu
port, 18	AppleTalk Protocol..., 72
BIN file, 108, 128	NetBEUI Protocol..., 56
bindery, 42	NetWare Configuration, 47
bindery emulation, 43	NetWare Protocol..., 25, 28, 39, 48
bindery emulation mode, 21	Save Configuration, 15, 19, 27, 47, 49, 73, 77
BOOTP (Boot Protocol), 113	Server Device..., 13, 14, 17, 72, 76
BSD/OS, 81	TCP/IP Protocol..., 77, 78, 79
CAPTURE command, 21, 37, 54	Configure AppleTalk button, 92

73

Image 79

Contents Administration Guide Trademarks Table of Contents Setting UP Appletalk Printing Setting an IP Address without EtherP Admin Page Introduction What Isnt Covered in This User’s Guide?Contents of the User’s Guide About This GuidePrint Server Administration User’s Guide HyperNet Fastprint Print Server Administration Features Installing EtherP Admin Installing and Starting the EtherP Admin ProgramSystem Requirements Starting EtherP Admin Choosing a Name for Your Print Server Getting Started Setting up Your Print ServerSetting a Password for Your Print Server Changing Print Server Port Settings EtherP Admin Administration Port Name See above Description See above Setting up Novell NetWare 3.x Printing Testing Your Print ServerIntroduction to Novell NetWare Printing Print Server Administration User’s Guide Setting up as a NetWare Print Server Print Server Administration User’s Guide Setting up as a NetWare Remote Printer Windows 95 Client Workstations Printing from Client Workstations\\SERVER\Q-LJ5L Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows 3.x and Windows for Workgroups 3.11 Workstations MS-DOS/PC-DOS Workstations NetWare SettingsPrint Server Administration User’s Guide NetWare Directory Services Setting up Novell NetWare 4.x PrintingSetting up as a NetWare Print Server EtherP Admin Administration Setting up as a NetWare Remote Printer Windows 95 Workstations Windows NT 4.0 and later Client Workstations Windows 3.1 and Windows for Workgroups 3.11 Workstations Setting up Microsoft Network Printing Setting up the Print Server for Microsoft Networking \\PS-142634\DJ-660C \\PS-142634\PS-142634-P2 Windows NT 4.0 and later Client Workstations Windows NT 3.51 Client Workstations Windows for Workgroups Client Workstations \\PS-142634\PS-142634-P1 Keeping the Print Queue on a Windows NT Server EtherP Admin Administration Choose Create Printer... from the Printer menu Setting up AppleTalk PrintingChoose AppleTalk Protocol... from the Configuration menu Setting up the Print Server for AppleTalk PrintingPrinting from MacOS Client Workstations Configuring TCP/IP Network Settings Setting up Unix TCP/IP PrintingAllowing SNMP-based Management Choose TCP/IP Protocol... from the Configuration menuPrinting Text Files from Unix Setting up Snmp TrapsPrinting from BSD Unix Versions Answer y and press Enter to continue Script will ask Printing from SCO Unix System V/386Printing from Solaris Printing from Windows NT Printing using Tftp Ftp ip-address EtherP Admin Main Window EtherP Admin AdministrationPress the Define Filter Strings button Filtering the List of Print ServersWorking with Environment Files and Preferences Monitoring Printer Status Checking NetWare Print Jobs Managing Print Queues Configuring NetWare Print ServicesPrint Server Administration User’s Guide Managing Printers Managing Print Servers Select Reset or Factory Reset from the Tools menu Resetting the Print ServerUpgrading the Print Server’s Internal Firmware Using the EtherP Admin Device Diagnostics Window Troubleshooting Print Server ProblemsSetting an IP Address without EtherP Admin Appendix Telnet Interface AdministrationChanging TCP/IP Settings Accessing the Telnet InterfaceSnmp Community Commumity Name Public Community Access Changing Server Settings Changing the Print Server Password Changing Port Settings Changing AppleTalk Settings Netware Displaying Configuration InformationUpgrading Print Server Firmware Index Print Server Administration User’s Guide Tools menu Product Warranty