GE manual Laptop connected to PBe

13

Figure 4. Laptop connected to PBe

4.The Connection Description dialog box will display. Type in a name for this session (PBe) and click OK.

5.The Connect To dialog box display. Select the COM port you are connected to in the Connect Using drop-down list.

6.The COMx Properties dialog box will display. Select the following settings to complete the HyperTerminal setup:

•Bits per second = 57600

•Data bits = 8

•Parity = none

•Stop bits = 1

•Flow control = none

7.Click OK.

To program the PBe do the following:

1.Power up the PBe by plugging in the power supply. The window shown in Figure 5 will appear confirming that you are in HyperTerminal programming mode.