GE GFK-2251 manual Communications Ports, Port Configurations, USB Ports, Compact Flash Port

Page 33

4

Communications Ports

Two USB ports and a Compact Flash port are located behind the front access cover in the lower right-hand side of the unit (Figure 4-1). To open the cover, loosen the thumb screw.

All other ports are located on the right side panel (Figure 4-2).

Port Configurations

Port

IRQ

Addresses

 

 

 

COM1

4

3F8h

COM2

3

2F8h

COM3 (Touch Option)

9

2E8h

LPT1

7

378h

USB Ports

These USB ports, along with the USB port on the side of the unit, are intended for such tasks as initial set up, downloading data, and uploading software. It is not intended for these ports to be connected continuously to devices.

Compact Flash Port

A Compact Flash device can be connected to this port for tasks such as backing up data. For nonincendive field wiring, use only 64MB flash card SANDISK SDCFBI-64-101-00

Figure 4-1. Connectors Located Behind Front Access Panel

GFK-2251

Chapter 4 Connectors and Cabling

4-3

Image 33
Contents GE Fanuc Automation As Used in this Publication Preface Content of This ManualPage Contents Contents Cmos Checksum Error Example of Cable Shield Clamping Assembly Installation I/O Port Range Table Panel C Industrial Computer Features Feature Description Feature SummaryRemovable Hard Disk Drive Front Panel KeypadsStatus LEDs Channels Front Access PanelEthernet port and side expansion slots Network InterfaceApplication Software Expansion SlotsSetup Chapter Powerup and Software InstallationStartup for Windows NT Systems Startup for Windows 2000 Systems GFK-2251 GFK-2251 Powerup and Software Installation GFK-2251 GFK-2251 Powerup and Software Installation Directory Structure Installing Application SoftwareShutting Down the Computer Image RecoveryChapter Hardware Installation AC Input Power Installation GuidelinesPanel Mounting Cutting the Panel CutoutPanel C Industrial Computer Dimensions Installing Panel Mounting ClipsInstalling Retaining Clips Blanking Plates Installing Expansion CardsConfiguring Expansion Cards Legacy ISA Only Chapter Connectors and Cabling Power Input Communications Ports Port ConfigurationsUSB Ports Compact Flash PortMouse and Keyboard Ports Pin Number Signal nameVideo Output Port Floppy Disk Drive and CD-ROM PortsPin Assignment Printer Port LPT1RS-232C Name Pin Assignment Serial Communication PortsEthernet Communication Port Pin No Signal DescriptionSix cable clamps included with assembly Ground Plate Outline, Mounting Dimensions, and Cable ClampExample of Cable Shield Clamping Assembly Installation Clamped Cable with Exposed Shield System Operation System Peripherals Operator Interfaces Period Membrane Keypad Scan Codes Control and Status LEDs Symbol Name FunctionTouch Screen Touch Screen Driver for WindowsNetwork Component Comments CommunicationsUSB Bios SettingsSelf-Test Diagnostics Diagnostics and TroubleshootingSystem Configuration Verification System Test and InitializationPowerup TroubleshootingSymptom Possible Causes Solution DisplayMemory External PS/2 MouseKeyboard PLC/PC Connection CommunicationsNetwork Communications To replace the battery Cmos Checksum ErrorIndustrial PC Chapter Technical Data Monitor SystemGFK-2251 Description Agency Standard CommentsGovernment Regulations General Specifications StandardsApplies to CE Marked units Panel C Nonincendive Field Wiring Control Drawing #DR00Cmos IndexIndex