GE GFK-2251 manual Ground Plate Outline, Mounting Dimensions, and Cable Clamp

4

2.95" (75 mm)

4.25"

(108 mm)

Mounting

Surface

Side View with

Spacing Requirements

	19.00"
	(483 mm)	18.31"
.250"(6.35 mm) dia. (QTY.2)		(465 mm)

Front View with Mounting Dimensions

Cable Clamp

(Six cable clamps included with assembly.)

* Additional cable clamps available (12 per package), catalog number IC697ACC737.

Figure 4-5. Ground Plate Outline, Mounting Dimensions, and Cable Clamp

The ground plate should be mounted near the unit. The cable clamp provides mechanical relief as well as electrical grounding. A typical installation is shown in Figure 4-6.

The cable clamp attaches to the ground plate by sliding it into two adjacent slots at the selected location for the cable. The cable is inserted between the ground plate and the cable clamp after removing the required section of the cable’s outer cover. Tighten the cable clamp by turning the thumbscrew clockwise. Do not over-tighten the thumbscrew— hand-tighten or tighten lightly with a tool.

Note: If you are installing the ground plate on a painted surface, the paint must be removed where the ground plate is to be mounted to ensure a good ground connection between the plate and mounting surface.

GFK-2251 Chapter 4 Connectors and Cabling 4-9