Gefen GTB-MHDMI1.3-441 user manual Example 2 Routing Input source 3 to the Output display

CONNECTING AND OPERATING

THE GEFENTOOLBOX 4X1 SWITCHER FOR HDMI

Example 2: Routing Input (source) 3 to the Output (display).

1.Using Fig 1.1 (page 6) as a starting point.

2.Press the Input Select button once.

Fig 1.2

The row of LED indicators will now appear as in Fig 1.2. LED #2 will turn off and LED #3 will become enabled, indicating that Input 3 is being routed to the Output (display).

Automatic Switching

The GefenToolBox 4x1 Switcher for HDMI features Automatic Switching. When a connected source is powered ON, the GefenToolBox 4x1 Switcher for HDMI will automatically switch to that input. If the same device is powered-down, the GefenToolBox 4x1 Switcher for HDMI will revert to the (original) active source. The Switcher will always change to the last source device that was powered ON.

Automatic Switching can be enabled or disabled through RS-232. See page 14 for the command syntax.

NOTE: The IR Remote Control unit, RS-232, and the front-panel buttons will always allow manual switching of source devices, even if Automatic Switching is enabled.

7