Gefen GTB-MHDMI1.3-441 user manual Operation Notes

Page 5

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE GEFENTOOLBOX 4X1 SWITCHER FOR HDMI

•The GefenToolBox 4x1 Switcher for HDMI has an Automatic Switching feature: Each time a connected device is powered ON, GefenToolBox 4x1 Switcher for HDMI will switch to that input. Once the connected device is powered down, the product will switch to the last active input. Switching can always be managed through IR remote control, RS-232, and the front panel buttons. See page 7 for details.

2

Image 5

Contents GTB-MHDMI1.3-441 GefenTechnical Support Asking for AssistanceTechnical Support Hours Write ToContents GefenToolBox 4x1 Switcher for Hdmi About Gefen Why GefenToolBox?Introduction How It WorksOperation Notes Hdmi 1.3 Features FeaturesGeneral Features Package IncludesPanel Layout Panel Descriptions Source Selector and Indicator LEDsHow to Operate the GefenToolBox 4x1 Switcher for Hdmi Connecting and Operating Gefentoolbox 4X1 Switcher for HdmiHow to Connect the GefenToolBox 4x1 Switcher for Hdmi Example 2 Routing Input source 3 to the Output display Automatic SwitchingRouting Sources to Displays IR Remote Control Unit DescriptionBattery Slot IR Remote Control Unit InstallationInstalling the IR Remote Control Battery Resolving IR Code Conﬂicts IR Remote Control Unit ConfigurationDIP Switches Source RMT-4IR button IR Remote Control Unit Operation4x1 Switcher IR Extender InstallationUsing the IR Extender RS-232 Serial Control RS-232 SettingsCommand CommandsCommand Description V command displays the ﬁrmware version Changing the IR channel Changing the IR ChannelWall Mounting Instructions 5V DC SpecificationsPage Page Page Rev A6 Nordhoff St., Chatsworth CA