Gefen GTB-MHDMI1.3-441 user manual IR Remote Control Unit Description, Routing Sources to Displays

Page 11

IR REMOTE CONTROL UNIT DESCRIPTION

1

2

1LED Button Press Indicator

This LED will activate momentarily upon each button press. This visual indicator is to inform the user that a command has been sent by the IR remote control.

2Display and Source Selection Buttons

These buttons will be used to send display and source selections to the GefenToolBox 4x1 Switcher for HDMI.

Routing Sources to Displays

Issuing a routing command is a simple process. There are a total of 4 buttons on the RMT-4IR. The individual buttons represent the Inputs that are available for the Output.

For example, to route the source connected to HDMI In 2 to the display, press button 2 on the RMT-4IR.

8

Image 11

Contents GTB-MHDMI1.3-441 GefenWrite To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works About Gefen Why GefenToolBox?GefenToolBox 4x1 Switcher for Hdmi IntroductionOperation Notes Package Includes FeaturesHdmi 1.3 Features General FeaturesPanel Layout Panel Descriptions Source Selector and Indicator LEDsHow to Operate the GefenToolBox 4x1 Switcher for Hdmi Connecting and Operating Gefentoolbox 4X1 Switcher for HdmiHow to Connect the GefenToolBox 4x1 Switcher for Hdmi Example 2 Routing Input source 3 to the Output display Automatic SwitchingRouting Sources to Displays IR Remote Control Unit DescriptionBattery Slot IR Remote Control Unit InstallationInstalling the IR Remote Control Battery Resolving IR Code Conﬂicts IR Remote Control Unit ConfigurationDIP Switches Source RMT-4IR button IR Remote Control Unit Operation4x1 Switcher IR Extender InstallationUsing the IR Extender RS-232 Serial Control RS-232 SettingsCommand CommandsCommand Description V command displays the ﬁrmware version Changing the IR channel Changing the IR ChannelWall Mounting Instructions 5V DC SpecificationsPage Page Page Rev A6 Nordhoff St., Chatsworth CA