GE 45606 manual Dimmer switch LED light Air gap switch

Page 3

CAUTION

This device is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician.

This dimmer switch is designed for use only with permanently installed incandescent lighting fixtures. Do not use it to control fluorescent lighting, transformer supplied lighting/appliances, motorized appliances or receptacles. The incandescent lighting controlled by this dimmer switch must not exceed a total of 500 watts.

There are no user serviceable parts in this unit.

Dimmer switch

LED light

Air gap switch

Image 3
Contents Dimmer Switch Introduction Dimmer switch LED light Air gap switch Risk of Fire Risk of Electrical Shock Risk of Burns Wireless Range Type of Construction See diagram on next Single, Dual and Triple Gang Boxes White Shock Hazard Observe Important Wiring Information Wire Connector / Combination ChartInstructions Manual Control Air Gap SwitchKey Features Basic OperationPrimary controller’s instructions for details LED Indicator Advanced OperationAll On/All Off Invert Switch Dim Rate AdjustmentsLED Light Valid Values Warranty Restoring Factory DefaultsFCC U2Z45606-7Operation is subject to the following two conditions Compliance with IC Rules and Regulations Specifications