Gefen EXT-DVI-848 user manual 8X8 DVI Matrix Remote Description & Operation

Page 14

8X8 DVI MATRIX REMOTE DESCRIPTION & OPERATION

Buttons 1 through 8 on the RMT-16 IR remote control correspond to display outputs A through H. Buttons 9 through 16 correspond to source inputs 1 through 8. Please use the steps and chart below for instructions on how to route video sources to displays.

Output			Input
Remote Button		Display	Remote Button		Source
1		A	9		1
2		B	10		2
3		C	11		3
4		D	12		4
5		E	13		5
6		F	14		6
7		G	15		7
8		H	16		8

Routing video to a particular display using the remote control is a 2 step process. The ﬁrst input step is to select the display (Output column). The second input step is to select the source (Input column) that will be routed to the display that was chosen in the ﬁrst step. The example below shows how to route input source number 7 to display C.

1.Press the remote button labeled 4 (display) on the RMT-16 IR remote control.

2.Press the remote button labeled 15 (source) on the RMT-16 IR remote control.

3.The video from DVI Input 7 should now appear on the display connected to monitor output C.

Repeat these steps to route any video source to any display.

11

Image 14

Contents 8x8 DVI Matrix Technical Support Hours Asking for AssistanceTechnical Support Write ToContents Gefen 8x8 DVI Matrix IntroductionGefen How It WorksOperation Notes Features Package Includes8X8 DVI Matrix Front Panel Layout 8X8 DVI Matrix Front Panel Descriptions Monitor A~H Selected Source 1~88X8 DVI Matrix Back Panel Layout Optional Remote Switching Ports 8X8 DVI Matrix Back Panel DescriptionsEXT-RMT-MATRIX-848 Panel Layout EXT-RMT-MATRIX-848 Panel Descriptions Direct Select ButtonsOperating the 8x8 DVI Matrix Connecting and Operating the 8X8 DVI MatrixHow to Connect the 8x8 DVI Matrix 8X8 DVI Matrix Remote Description & Operation Output Input Remote Button Display SourceRMT-16-IR IR Channel Configuration 8x8 DVI Matrix DIP Switches RMT-16-IR DIP SwitchesEXT-RMT-MATRIX-848 Remote Operation RMT-8-IR IR Channel Configuration RMT-8-IR DIP SwitchesRS232 Settings RS-232 Serial Control InterfaceNetwork Cable Wiring Diagram Pin ColorAppendix a Bank a Bank B Bank C Bank DDIP Switch Input Description For future implementation DIP Switch Monitor Description For future implementationModify By Function Appendix BModify By Shortcut Edid From Bank Store In Locals Edid DS Edid Store In Locals EdidDS Edid Store In Edid Bank Print Local Edid Route Input DDC To Local EdidPrint DS Edid Print Edid BankLoad Edid To Edid Bank Print Edid SettingLoad Edid To Locals Edid Set Output Pre EmphasisSet Current Matrix As Routing State Set Default SettingSet Preset Routing State Print Routing State TableSpecifications