Gefen EXT-DVI-848 user manual EXT-RMT-MATRIX-848 Panel Descriptions, Direct Select Buttons

Page 12

EXT-RMT-MATRIX-848 PANEL DESCRIPTIONS

1Direct Select Buttons

When this unit is attached to a CAT-5 port that corresponds to a display on the 8x8 DVI Matrix, use buttons 1 through 8 to select what source that display will be viewing. Buttons 1 through 8 directly correspond to DVI source inputs 1 through 8 on the 8x8 DVI Matrix.

2IR Receiver

This port will receive commands from an RMT-8-IR remote control for remote controlled switching at the extended location.

3Active Input LED Indicator

1 through 8 LED indicators that will visually acknowledge which source is currently selected.

4CAT-5 Input Port

Connect a CAT-5 cable between this port and the remote switching ports (Item 1 through 8 on page ##) for remote switching.

5IR Extension Eye

Connect the optional IR Receiver Extension (part# EXT-RMT-EXTIR) to this port.

6RS-232 Serial Control Port

This port can be used to control switching via RS-232 serial communication.

9

Image 12

Contents 8x8 DVI Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenGefen 8x8 DVI Matrix How It WorksOperation Notes Features Package Includes8X8 DVI Matrix Front Panel Layout 8X8 DVI Matrix Front Panel Descriptions Monitor A~H Selected Source 1~8 8X8 DVI Matrix Back Panel Layout Optional Remote Switching Ports 8X8 DVI Matrix Back Panel DescriptionsEXT-RMT-MATRIX-848 Panel Layout EXT-RMT-MATRIX-848 Panel Descriptions Direct Select ButtonsConnecting and Operating the 8X8 DVI Matrix How to Connect the 8x8 DVI MatrixOperating the 8x8 DVI Matrix 8X8 DVI Matrix Remote Description & Operation Output Input Remote Button Display SourceRMT-16-IR IR Channel Configuration 8x8 DVI Matrix DIP Switches RMT-16-IR DIP SwitchesEXT-RMT-MATRIX-848 Remote Operation RMT-8-IR IR Channel Configuration RMT-8-IR DIP SwitchesRS232 Settings RS-232 Serial Control InterfaceNetwork Cable Wiring Diagram Pin ColorAppendix a Bank a Bank B Bank C Bank DDIP Switch Input Description For future implementation DIP Switch Monitor Description For future implementationAppendix B Modify By ShortcutModify By Function DS Edid Store In Locals Edid DS Edid Store In Edid BankEdid From Bank Store In Locals Edid Route Input DDC To Local Edid Print DS EdidPrint Local Edid Print Edid BankPrint Edid Setting Load Edid To Locals EdidLoad Edid To Edid Bank Set Output Pre EmphasisSet Default Setting Set Preset Routing StateSet Current Matrix As Routing State Print Routing State TableSpecifications