Gefen EXT-DVI-848 user manual Print Edid Setting, Load Edid To Locals Edid, Load Edid To Edid Bank

APPENDIX B

Print EDID Setting

This function sends the EDID setting table to the serial port.

#PRSEEDID\r

Load EDID To Locals EDID

These functions will load an EDID file through the serial port and store it in any Input’s Local EDID.

#LOEDIDTOLO_param1_param2_param3[_param4][_param5][_param6]

[_param7][_param8][_param9][_param10]\r

Parameter	Name	Value
1	Semi echo mode	0
	Full echo mode	1
2	EDID.bin file (256 bytes)	1
	EDID.bin file (256 bytes)	2
3 (4-10 optionally)	INPUT	[1:8]

Load EDID To EDID Bank

This function loads and EDID through the serial port and store it in the EDID bank.

#LOEDIDTOBA_param1_param2\r

	Parameter		Name	Value
1			Semi echo mode	0
			Full echo mode	1
2		EDID.bin file (256 bytes)		1
		EDID.bin file (256 bytes)		2
3			EDID bank offset	[1:7]
Set Output Pre Emphasis
This function will set output Pre Emphasis in db.
			#PE_param1_param2\r
	Parameter		Name	Value
	1		MONITOR	[A:H]
	2		Pre Emp level [db]	[0,2,4,6]

22