Gefen EXT-DVI-848 user manual RMT-8-IR IR Channel Configuration, RMT-8-IR DIP Switches

Page 17

RMT-8-IR IR CHANNEL CONFIGURATION

The RMT-8-IR remote control (sold separately) has 4 discrete IR channels for use if the default IR code set conﬂicts with other remote control commands in your setup. There are 2 DIP Switches underneath the battery on the RMT-8-IR remote control that must match DIP Switches on the EXT-RMT-MATRIX-848. There are 4 DIP Switches located on the underside of the EXT-RMT-MATRIX-848. DIP Switches 1 and 2 on the EXT-RMT-MATRIX-848 correspond to DIP Switches 1 and 2 on the RMT-8-IR remote control. See below for DIP Switch conﬁguration of each of the available remote channels.

RMT-8-IR DIP Switches

RMT-8-IR REMOTE CONTROL

Remote Channel 1:					Remote Channel 2:
Default


1			2		1			2

Remote Channel 3:					Remote Channel 4:





1			2		1			2

Remote Channel 1: Default

Remote Channel 3:

EXT-RMT-MATRIX-848

Remote Channel 2:

1 2 3 4

Remote Channel 4:

1 2 3 4

1 2 3 4

1 2 3 4

14

Image 17

Contents 8x8 DVI Matrix Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Gefen IntroductionGefen 8x8 DVI Matrix How It WorksOperation Notes Package Includes Features8X8 DVI Matrix Front Panel Layout Monitor A~H Selected Source 1~8 8X8 DVI Matrix Front Panel Descriptions8X8 DVI Matrix Back Panel Layout 8X8 DVI Matrix Back Panel Descriptions Optional Remote Switching PortsEXT-RMT-MATRIX-848 Panel Layout Direct Select Buttons EXT-RMT-MATRIX-848 Panel DescriptionsOperating the 8x8 DVI Matrix Connecting and Operating the 8X8 DVI MatrixHow to Connect the 8x8 DVI Matrix Output Input Remote Button Display Source 8X8 DVI Matrix Remote Description & Operation8x8 DVI Matrix DIP Switches RMT-16-IR DIP Switches RMT-16-IR IR Channel ConfigurationEXT-RMT-MATRIX-848 Remote Operation RMT-8-IR DIP Switches RMT-8-IR IR Channel ConfigurationRS-232 Serial Control Interface RS232 SettingsPin Color Network Cable Wiring DiagramBank a Bank B Bank C Bank D Appendix aDIP Switch Monitor Description For future implementation DIP Switch Input Description For future implementationModify By Function Appendix BModify By Shortcut Edid From Bank Store In Locals Edid DS Edid Store In Locals EdidDS Edid Store In Edid Bank Print DS Edid Route Input DDC To Local EdidPrint Local Edid Print Edid BankLoad Edid To Locals Edid Print Edid SettingLoad Edid To Edid Bank Set Output Pre EmphasisSet Preset Routing State Set Default SettingSet Current Matrix As Routing State Print Routing State TableSpecifications