Gefen EXT-DVI-848 user manual EXT-RMT-MATRIX-848 Remote Operation

Page 16

EXT-RMT-MATRIX-848 REMOTE OPERATION

(PRODUCT SOLD SEPARATELY)

Once the EXT-RMT-MATRIX-848 Remote is installed and connected to a remote output port on the 8x8 DVI Matrix, use the direct selection buttons to chose a source to view. Once a source is chosen, its corresponding LED should become active. Optionally, switching can be done using an RMT-8-IR remote control (sold separately) or through the RS-232 serial communications port on the rear panel.

LED Indicator

Input Selection

Buttons

(REMOTE SOLD SEPARATELY)

The RMT-8-IR remote control can be used to select the source that will be displayed on the monitor connected to the EXT-RMT-MATRIX-848.

RMT-8-IR Button

DVI Source

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

13

Image 16
Contents 8x8 DVI Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenGefen 8x8 DVI Matrix How It WorksOperation Notes Features Package Includes8X8 DVI Matrix Front Panel Layout 8X8 DVI Matrix Front Panel Descriptions Monitor A~H Selected Source 1~88X8 DVI Matrix Back Panel Layout Optional Remote Switching Ports 8X8 DVI Matrix Back Panel DescriptionsEXT-RMT-MATRIX-848 Panel Layout EXT-RMT-MATRIX-848 Panel Descriptions Direct Select ButtonsHow to Connect the 8x8 DVI Matrix Connecting and Operating the 8X8 DVI MatrixOperating the 8x8 DVI Matrix 8X8 DVI Matrix Remote Description & Operation Output Input Remote Button Display SourceRMT-16-IR IR Channel Configuration 8x8 DVI Matrix DIP Switches RMT-16-IR DIP SwitchesEXT-RMT-MATRIX-848 Remote Operation RMT-8-IR IR Channel Configuration RMT-8-IR DIP SwitchesRS232 Settings RS-232 Serial Control InterfaceNetwork Cable Wiring Diagram Pin ColorAppendix a Bank a Bank B Bank C Bank DDIP Switch Input Description For future implementation DIP Switch Monitor Description For future implementationModify By Shortcut Appendix BModify By Function DS Edid Store In Edid Bank DS Edid Store In Locals EdidEdid From Bank Store In Locals Edid Route Input DDC To Local Edid Print DS EdidPrint Local Edid Print Edid BankPrint Edid Setting Load Edid To Locals EdidLoad Edid To Edid Bank Set Output Pre EmphasisSet Default Setting Set Preset Routing StateSet Current Matrix As Routing State Print Routing State TableSpecifications