Gefen EXT-PS5-8R Connecting and Operating the Power Rack, How to Connect the Power Rack

Page 9

CONNECTING AND OPERATING THE POWER RACK 58

1.Connect up to 8 power output cables (8 are included) to the Power Rack 58 unit.

2.Connect the opposite ends of the power output cables to compatible Gefen products.

NOTE: The amperage draw of each connected device must not exceed 2.5A.

3.Connect the included 24V DC power supply to the power receptacle on the Power Rack 58. Connect the power plug into an available power source.

No further conﬁguration is necessary to operate the Power Rack 58.

Image 9

Contents Power Rack Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen Power RackGefen How It WorksOperation Notes Features FeaturesPackage Includes Panel Layout Dual Color Status LED Panel DescriptionsConnecting and Operating the Power Rack How to Connect the Power RackHow to Operate the Power Rack Specifications Product Registration WarrantyPage Page Rev A5 Nordhoff St., Chatsworth CA