Fortinet 5001A-SW, 5001A-DW manual Configuring Transparent mode

Page 31

 

 

 

Quick Configuration Guide

Configuring Transparent mode

6Repeat to configure each interface as required, for example, to configure the port2 interface to the setting that you added to Table 8 on page 29.

config system interface edit port2

...

7Configure the primary and secondary DNS server IP addresses to the settings that you added to Table 8 on page 29.

config system dns

set primary <dns-server_ip> set secondary <dns-server_ip> end

8Configure the default gateway to the setting that you added to Table 8 on page 29.

config router static edit 1

set device <interface_name> set gateway <gateway_ip>

end

Configuring Transparent mode

Use Table 9 to gather the information you need to customize Transparent mode settings.

Table 9: Transparent mode settings

Admin Administrator Password:

 

IP:

_____._____._____._____

Management IP

Netmask:

_____._____._____._____

 

The management IP address and

netmask must be valid for the

 

network where you will manage the FortiGate-5001A unit.

 

 

 

 

Default Gateway IP address:

_____._____._____._____

Default Route

In Transparent mode the default route requires the default gateway IP

 

address. The default route directs all non-local traffic to the external

 

network.

 

 

 

 

DNS Servers

Primary DNS Server:

_____._____._____._____

Secondary DNS Server:

_____._____._____._____

 

Using the web-based manager to configure Transparent mode

1Connect port1 of the FortiGate-5001A board to the same hub or switch as the computer you will use to configure the FortiGate board.

Note: If you cannot connect to port1, see “Using the CLI to configure Transparent mode” on page 32.

2Configure the management computer to be on the same subnet as the port1 interface of the FortiGate-5001A board. To do this, change the IP address of the management computer to 192.168.1.2 and the netmask to 255.255.255.0.

3To access the FortiGate web-based manager, start Internet Explorer and browse to https://192.168.1.99 (remember to include the “s” in https://).

FortiGate-5001A Security System Guide

 

01-30000-83456-20081023

31

Image 31
Contents FortiGate-5001A Page Contents For more information FortiGate-5001A security system Front panel LEDs and connectors Front panel LEDs and connectorsLists and describes the FortiGate-5001A LEDs LEDsBase backplane communication ConnectorsFabric backplane communication FortiGate-RTM-XB2 AMC modulesFortiGate-ASM-FB4 Hardware installation SW11 Changing FortiGate-5001A SW11 switch settingsLocation of SW To change or verify the SW11 switch settingOpen FortiGate-5001A mounting componentsTo insert a FortiGate-5001A board into a chassis slot Inserting a FortiGate-5001A boardOpen the handles to their fully open positions FortiGate-5001A normal operating LEDs To remove a FortiGate-5001A board from a chassis slot Removing a FortiGate-5001A boardRemoving a FortiGate-5001A board Installing and removing AMC modules Resetting a FortiGate-5001A boardTo insert an AMC module into a FortiGate-5001A board To install an AMC slot filler panelInserting AMC slot filler panels Inserting AMC modulesTo remove an AMC module from a FortiGate-5001A board Removing AMC modulesAll chassis Firmware problem TroubleshootingFortiGate-5001A does not start up FortiGate AMC modules not detected by FortiGate-5001A board To remove and reset an AMC moduleRegistering your Fortinet product Planning the configurationTransparent mode NAT/Route modeWeb-based manager Choosing the configuration toolConfiguring NAT/Route mode Factory default settingsCommand Line Interface CLI To configure interfaces Go to System Network Interface Using the web-based manager to configure NAT/Route modeTo configure the Default Gateway Using the CLI to configure NAT/Route modeUsing the web-based manager to configure Transparent mode Configuring Transparent modeTo switch from NAT/Route mode to transparent mode Using the CLI to configure Transparent modeTo upgrade the firmware using the CLI To upgrade the firmware using the web-based managerUpgrading FortiGate-5001A firmware FortiGate-5001A base backplane data communication CLI FortiGate-5001A fabric backplane data communication To power off a FortiGate-5001A board Powering off the FortiGate-5001A boardPowering off the FortiGate-5001A board Fortinet documentation Customer service and technical supportRegister your Fortinet product Regulatory compliance Trademarks

5001A-SW, 5001A-DW specifications

Fortinet's FortiGate 5001A is a high-performance, next-generation firewall designed to meet the demands of large enterprises and data centers. The model comes in two distinct configurations—the 5001A-DW for data center workloads and the 5001A-SW for enhanced security capabilities.

The 5001A-DW is specifically tailored for critical data center environments, offering robust security and seamless integration into virtualized infrastructures. Its hardware design accommodates high capacity and throughput, beneficial for managing large volumes of data without compromising on security. This variant supports advanced networking technologies, such as Software-Defined Networking (SDN) and Network Function Virtualization (NFV), making it a versatile solution for organizations looking to optimize their network performance.

On the other hand, the 5001A-SW focuses more on advanced threat protection, integrating Fortinet’s FortiOS operating system, which provides comprehensive and consolidated security features. This model is engineered to safeguard against sophisticated cyber threats through its AI-powered security analytics and automated response capabilities. With an array of built-in security features, including IPS (Intrusion Prevention System), Application Control, and Web Filtering, the 5001A-SW enhances visibility and control over the network environment.

Both models provide exceptional SSL inspection capabilities, allowing organizations to analyze encrypted traffic without latency. With Fortinet's Security Fabric technology, the 5001A series offers integrated security across various network layers, streamlining security management and improving response times to threats.

The appliances also support advanced routing protocols and capabilities like Virtual Routing and Forwarding (VRF) to facilitate complex network designs. Their flexibility in deployment makes them suitable for a variety of environments, whether on-premises or in the cloud.

In terms of performance, the FortiGate 5001A series boasts impressive throughput rates, ensuring that organizations can scale their security measures in line with their growth. They are designed to minimize downtime, allowing for continuous and uninterrupted security operations.

Overall, the Fortinet FortiGate 5001A-DW and 5001A-SW models stand out for their scalability, advanced threat protection, and robust performance, positioning them as essential tools for organizations seeking to fortify their defenses against evolving cyber threats in today's digital landscape.