Farallon Communications NetopiaTM manual Windows CON ﬁGURATION Tool

Page 19

WINDOWS CONﬁGURATION TOOL

19

5. When the window below appears on your screen, click Finish.

6.The Netopia ISDN PC Card Conﬁguration Tool launches and the Properties window appears:

7.Complete your PC Card conﬁguration by continuing with the “Proﬁle Conﬁguration” section on the next page.

Image 19

Contents User’s Guide for Windows FarallonâPage Contents DOS About the Netopia Isdn PC Card Chapter Inserting the PC Card InstallationInterface Connecting Your EquipmentConnecting the S/T interface connector and RJ-45 cable Connecting Your Interface to the PC Card Configuring the PC CardWindows Windows NT Installation Select COM Port, then click Next ATI8 Windows 3.X and DOS Windows Conﬁguration Tool Using the Setup WizardChapter Windows CON ﬁGURATION Tool Profile Configuration Windows CON ﬁGURATION Tool For either the Primary or Alternate Location, the following Updating Firmware Chapter VT100 Conﬁguration Tool VT100 Configuration Tool ActivationMain VT100 Conﬁguration Tool screen appears ESC Profile Configuration VT100 CON ﬁGURATION Tool For either the Primary or Alternate Location, the following Making a Connection OperationWindows Operation Windows NT Operation Chapter Windows NT Test Netopia Isdn PC Cård Netopia Isdn PC Card DOS Dialing with Multilink PPP About PPP Authentication Protocols Dialing with AT Commands Using Other Communications ApplicationsData Compression Netopia Isdn PC Card LedsPage Troubleshooting Chapter Troubleshooting Solutions to Common Problems NetopiaCard Xmit test Enter to start, Enter to stop Xmit test terminated Technical Speciﬁcations Netopia Isdn PC Card Hardware Specifications NTT Jate Regulatory Information for the United States Regulatory NoticesRegulatory Information for Europe Appendix a README.TXT ﬁle on the Netopia Isdn PC Card Disk AT CommandsAT@MENU Atvc Connect AT Command Result CodesFarallon Technical Support HOW to Reach USFarallon BBS Limited Warranty and Limitation of Remedies Warranty