Farallon Communications NetopiaTM manual Connecting Your Equipment, Interface

8 CHAPTER 2

STEP 2: CONNECTING YOUR EQUIPMENT

Depending on the product you purchased, the Netopia ISDN PC Card with U interface or the Netopia ISDN PC Card with S/T interface, the appropriate equipment is provided. Your geographical location typically dictates the ISDN interface type to use. The following table summarizes the interface and equipment used by geographical region:

Region	Interface	Provided Equipment
North America	U interface	Integrated-NT1 (ISDN U interface
		connector) and RJ-45 to RJ-45
		cable
Outside North	S/T interface	ISDN S/T interface connector and
America (except		RJ-45 to RJ-45 cable
Australia)
Australia	S/T interface	ISDN S/T interface connector,
		RJ-45 to RJ-45 cable, and
		terminating resistor

UINTERFACE

The U interface is used in North America where an external NT1 is required to make an ISDN connection. Plug the RJ-45 cable into your ISDN wall jack. Then connect the cable to the RJ-45 port on the

U interface connector.

Connecting the U interface connector and RJ-45 cable