60 | APPENDIX B | |
|
| |
AT Command | Description | |
|
|
|
AT!E5=n |
| V.120 N200 (Maximum Retry Count) |
|
|
|
AT!E6=n |
| V.120 T203 (Link Integrity Timer) |
|
|
|
AT!E7=n |
| V.120 Idle Timer |
|
|
|
AT!N1=n |
| * ISDN Primary Directory Number |
|
| |
AT!N11=n | * ISDN Alternate Directory Number | |
|
|
|
AT!N2=n |
| Primary Directory Number #2 (for Multilink PPP) |
|
| |
AT!N21=n | Secondary Directory Number #2 (for Multilink PPP) | |
|
|
|
AT!N3=n |
| * ISDN Primary Subaddress |
|
| |
AT!N31=n | * ISDN Alternate Subaddress | |
|
|
|
AT!N4=n |
| Primary Subaddress #2 (for Multilink PPP) |
|
| |
AT!N41=n | Secondary Subaddress #2 (for Multilink PPP) | |
|
|
|
AT%A2=n |
| * Rate Adaption Control |
|
| |
AT%A95=c | Incoming Data Call Answer | |
|
| |
AT%M1=n | Local Endpoint Identifier Class | |
|
| |
AT%M2=n | Remote Endpoint Identifier Class | |
|
| |
AT%M3=n | Local Endpoint Identifier Value | |
|
| |
AT%M4=n | Remote Endpoint Identifier Value | |
|
| |
AT%MT1=v | PPP Turbo Mode Command. A setting of 0 disables turbo mode, while a setting of | |
|
| |
|
| |
AT%MT2=v | PPP Turbo Mode Command. A setting between 57600 and 115200 that specifies the | |
|
| minimum PC bitrate threshold for the activation of turbo mode. The default is 57600. |
|
|
|
AT&Cn |
| Data Carrier Detect |
|
|
|
AT&Dn |
| Data Terminal Ready |
|
|
|
AT&F |
| Load Limited Factory Profile; Replaces all settings in current profile with default factory |
|
| values except for ISDN Switch Type, SPID numbers, local ISDN Numbers, Subaddresses, |
|
| Rate Adaption Protocols, Outgoing ISDN Numbers, Multilink PPP Parameters |
|
|
|
AT&Kn |
| Flow Control |
|
|
|
AT&Sn |
| Data Set Ready |
|
|
|
AT&V |
| View Current and Stored Profile |
|
|
|
AT&Wn |
| Save Current to Stored Profile |
|
|
|
AT&Yn |
| Designate Stored Profile n as the Powerup Profile |
|
|
|
AT&Zn=v |
| Store Telephone Number(s) |
|
| |
AT@MENU | Activate VT100 Configuration Tool | |
|
|
|
AT>F |
| Restores All Profiles to Factory Settings |
|
|
|
AT>FC |
| Replaces all Settings in the Current Profile with Default Factory Values |
|
|
|
AT>H |
| Display a List of All Commands with Descriptions |
|
|
|