4 Configuration Menu
4.13.System
Figure 4.19 System Configuration
The System link allows users to configure basic F3400/F1000 information. The F3400/F1000's IP Address and
System Name: Appears on the F3400/F1000's Main Menu. The system name is also included as part of email and pager notifications.
System Contact: Lists the individual responsible for the F3400/F1000. The System Contact is only available through SNMP Gets and is not included in email, pager or SNMP Trap notifications.
System Location: Lists the location of the F3400/F1000. It is used to help identify the F3400/ F1000 when viewing the webpages. The System Location is not included in email, pager or SNMP Trap notifications.
Web Refresh Rate: The rate at which the F3400/F1000's webpages refresh themselves within the Web browser. Only pages that display monitoring points are automatically refreshed (Main Menu, Relay Status, View Points, and Modbus Slave pages). The default is 0 seconds (disabled), but is typically set for 15 to 20 seconds.
TFTP Server Enable (udp port: 69): This setting opens or closes Port 69 on the LAN connection to the F3400/F1000. The TFTP port is used to upgrade firmware and save and load configurations. It can be disabled for security reasons and only opened for short periods of time during firmware upgrades; see Chapter 8, “Upgrading Firmware and Managing Configuration Data” on page 73, for more information.
Digital Status Color: Allows you to choose the color (green, gold, magenta) displayed on the main menu.
Note Changes will not go into effect until the Submit Changes button is clicked.
www.rletech.com | 55 | 970.484.6510 |