Falcon F1000, F3400 manual Main Configuration Menu SC, Configuration Menu Factory Menu

5EIA-232 Interface

5.3.1Main Configuration Menu – SC

Typing SC at the command prompt on the Main Menu displays the Main Configuration Menu that lists all items for system setup and configuration. This menu may be password protected. If it is, the password must be entered when the SC menu selection is made. To enter the password, type SC, press the space bar once, and then type the appropriate password.

Table 5.2 Main Configuration Menu (SC) Commands

Command	Description	Function
1	IP	1displays the IP Configuration Menu.
	Configuration
	Menu
2	Factory Menu	2displays the Factory Menu. This menu provides a means to
		change the MAC address and erase the user configuration
		stored in Flash memory. This area is password protected. If
		you are familiar with MAC assignments and configuring the
		F3400/F1000, contact RLE Technologies for the password
		to this menu.
		WARNING! Once you receive the password for this menu,
		you assume full responsibility for the system configuration
		and proper MAC addressing of the F3400/F1000.
3	Load/Save	3allows user configurations to be saved and reloaded onto
	Configuration	other F3400/F1000s. Windows HyperTerminal application
	Data	software may be used to perform the load/save functions.
		Before the configuration can be loaded onto other F3400/
		F1000s, it must be checked for accuracy. Blank spaces or
		unwanted characters, such as the “Press <enter> to
		download the file” text, may be saved into the beginning of
		the configuration file. Open the file in notepad and examine
		the first few lines. Delete any characters that were
		accidentally embedded into the file.
4	Configuration	4 allows the user to password protect the configuration
	Password	section of the F3400/F1000 Firmware. The password can be
		any combination of 7 numbers and/or characters.
x	Exit	x exits the Main Configuration Menu and returns to the Main
		Menu.

www.rletech.com 66 970.484.6510