Enterasys Networks RBT-1602 manual Lightning Protector, Cable Options and Model Numbers

Cable Options

Cable Options

The RoamAbout low‐loss, outdoor, watertight cables that you use to connect the RoamAbout AP to an antenna are available in the lengths listed in Table 1‐6.

All cables have Reverse‐N Female connectors on both ends.

Table 1-6 Cable Options and Model Numbers

Model Number	Description
RBTES-L200-C20F	20 feet (6.1 meters) LMR200
RBTES-L600-C25F	25 feet (7.6 meters) LMR600
RBTES-L400-C50F	50 feet (15.24 meters) LMR400
RBTES-L600-C50F	50 feet (15.24 meters) LMR600
RBTES-L400-C75F	75 feet (22 meters) LMR400
	Note: Enterasys Networks does not recommend using this cable due to the
	loss factor.

To ensure you order the right cable length, carefully determine the distance between the locations where you intend to mount the RoamAbout AP and outdoor antenna.

Note: Enterasys Networks recommends using LMR600 (part number RBTES-L600-C25/50F) because of the high losses.

Lightning Protector

Table 1‐7 provides information about the RoamAbout Lightning Protector for use with RoamAbout antennas.

Table 1-7 Lightning Protector

Model Number	Description
RBTES-AG-LPM	Reverse-N Male on both ends
	Male connector housing and male center contact.

RoamAbout Antenna Site Preparation and Installation Guide 1-11