Enterasys Networks RBT-1602 manual Attaching the Antenna Bracket to the Antenna

Mounting the Antenna

3.Obtain the proper screws to secure the antenna bracket to this wall surface.

Note: This antenna does not ship with screws for attaching the antenna bracket to a wall.

Attaching the Antenna Bracket to the Antenna

Figure 3‐11 illustrates how to attach the antenna bracket to the 5.8 GHz panel antenna. Table 3‐10 lists the components for this procedure.

Figure 3-11 Attaching Antenna Bracket to RoamAbout 5.8 GHz Panel Antenna

5

1

4

2

3

Table 3-10 RoamAbout 5.8 GHz Panel Antenna Bracket Mounting Components

#Component

1Antenna bracket

2Antenna (RBTES-AH-P23M)

3Screw holes to attach bracket to antenna

4Screws to attach bracket to antenna

5Label showing direction of antenna vertical polarization

To attach the antenna bracket to the antenna, perform the following steps:

1.Place the antenna so that the side with screw holes is facing up.

2.Use the polarization label on the upper left corner of the antenna to orient the antenna with the correct polarization.

RoamAbout Antenna Site Preparation and Installation Guide 3-23