![](/images/new-backgrounds/1192215/19221565x1.webp)
3
Antenna Installation
This chapter provides the information necessary for a professional antenna installer to install the RoamAbout antennas.
Electrical Hazard: Antennas should only be installed by a qualified antenna installer. The antenna installation professional should be licensed or certified in accordance with local regulations.
Do not install the antenna in wet, windy, icy, or otherwise unsafe weather conditions.
Peligro de descarga eléctrica: la colocación de la antena debe realizarla un instalador de antenas calificado y con las licencias correspondientes en las regulaciones locales. No instale la antena en condiciones climatológicas adversas, como lluvia, viento, heladas, nieve, etc., que podrían resultar peligrosas.
Elektrische Spannung: Antennen dürfen nur von qualifiziertem Fachpersonal installiert werden. Antenneninstallateure müssen den geltenden Vorschriften entsprechend lizenziert oder zugelassen sein. Von Installationsarbeiten bei Nässe, Wind, Frost oder anderen gefährlichen Wetterbedingungen ist abzusehen.
Note: Not all antennas in this chapter can be used by both wireless access points. Refer to Appendix A, Specifications, to determine if your access point supports the specified antenna.
The RoamAbout outdoor antenna kits do NOT provide the following items, which may be necessary to install the antenna:
•Mast or other antenna support structure
•Guy wires
•All cables or other hardware necessary for a complete grounding system
•Waterproof tape
Note: It is the responsibility of the
RoamAbout Antenna Site Preparation and Installation Guide