Enterasys Networks MicroMMAC-T manual Accessing the Alarm Limits Window

Page 84

Token Ring Alarms

Accessing the Alarm Limits Window

To access the Alarm Limits window from the Chassis View window:

1.Click to display the Network pull-down menu.

2.In the Network pull-down menu, click on the Network 1 entry, then drag right and down to select Alarm Limits.... The Alarm Limits window (Figure 4-1) will appear.

3.Set the alarm limits as instructed in Setting Ring-Level Alarm Limits, below.

Figure 4-1. The Alarm Limits Window

Ring-Level Alarm Limits for Network Events

The following thresholds, listed in the section of the window labeled Ring Errors, are based on the number of occurrences of the selected event on the ring within a user-defined time interval.

Ring Purges	The number of times (since the ring network was created
	or the MicroMMAC-T was last reset) that the ring’s
	active monitor can purge the ring (including purges at
	the end of the active monitor selection process). Note that
	the ring purge count is not reset when the active monitor
	changes. The default value is 70.
AMP	The number of times that a duplicate active monitor can
	be detected on a ring within the alarm time base before
	an alarm is triggered.
	The default value is 1.

4-2	Ring-Level Alarm Limits

Image 84

Contents MicroMMAC-T Users Guide Page Virus Disclaimer Page Restricted Rights Notice Page Contents Contents Chapter Token Ring StatisticsChapter Token Ring Alarms Chapter Station List and Station MapIndex Contents Viii Introduction Using This Guide IntroductionUsing the Mouse Related ManualsSoftware Conventions Left Mouse Button Right Mouse Button Using Window Buttons Common MicroMMAC-T Window FieldsDevice Name IP AddressLocation MAC AddressUsing On-line Help Getting HelpGetting Help from Enterasys Global Call Center Introduction MicroMMAC-T Chassis View Viewing Chassis Information Front Panel Information Menu Structure TimeDate MicroMMAC-T Chassis View Menu Structure Device MenuPort Status Menu Network Menu Utilities MenuHelp Menu Module MenusPort Menus Port Status Displays Ring Port MenusSelecting a Port Status View Errors LoadStatus Port Assignment Ring Port StatusPort Status Color Codes Chassis Manager Window Viewing Hardware TypesClick on MIBs Supported Managing the Hub Device TypeModule Type Management Station Configuration Accessing the TR Management Station Configuration WindowSetting Station Name and Location Station Name Configuration WindowHost Error Report Timer Delay Enable Beacon RecoverySpecifying Ring Management Functions Inhibit Active MonitorEnable Ring Poll Recovery Viewing Network Information Selecting the RingNetwork Information Window Fields Ring of X Configured Rings Viewing Module StatusToken Ring Board Status Window Fields Board NumberAccessing the Ring Port Status window Viewing Ring Port StatusLast Wire Fault Ring Port Status Window FieldsPort Media TypeSetting the Device Date and Time Using the Media Type and Phantom Current Radio ButtonsUsing an Uninterruptable Power Supply UPS 13. Device Date Change WindowAccessing the UPS Window 14. The UPS WindowBattery Output Battery CapacityUPS Uptime Line VoltageResetting the Device Setting the UPS IDUsing the Test Option Using the Disconnect OptionEnabling and Disabling Port Mapping Enabling and Disabling Link Traps 15. The Port Map WindowSetting Token Ring Boards to Automode Enabling and Disabling Link Traps at the Board LevelEnabling and Disabling Ports Enabling and Disabling Station PortsEnabling and Disabling Ring Ports Ring Out Enable/Disable Viewing I/F Summary InformationIndex TypeDescription Physical StatusInterface Performance Statistics/Bar Graphs Raw CountsRate Viewing Interface DetailAddress UnicastMaking Sense of Detail Statistics Transmitted Errors /Packets Transmitted Statistics Window Features Setting Total, Delta, or Cumulative CountsViewing Elapsed, Average, and Peak Activity Levels Token Ring StatisticsSetting the Statistics Poll Interval New Timer Interval Text BoxAccessing the Network Statistics Selections Network Level StatisticsNetwork Statistics Window General Information FieldsRing Speed Ring Status FieldsStations Inserted Active MonitorSoft Error Fields Beacon StatisticsBurst Errors Internal ErrorsAbort Sequences Congestion Errors Token ErrorsFrequency Errors Lost FramesNetwork Timer Statistics Total ErrorsNetwork Timer Statistics Window Fields Network Performance Graphs FramesKBytes Configuring the Network Performance Graph Network Performance Graph StatisticsNetwork Events Red Traffic BlueFrame Size Window Total and Delta Graph DisplayUsing the Pie and Bar Radio Buttons Frame Sizes Window with Pie ChartProtocol Statistics Window Accessing the Management Station Statistics Selection Management Station StatisticsSoft Errors Fields FC Errors Soft ErrorsHard Errors Fields Signals LostRecoveries Lobe Wire FaultHard Errors Transmitted BeaconsAccessing the Station Port Menu Port Level StatisticsStation Statistics Window Station Statistics Window General Fields Station NameLink Time Station Statistics Window Performance FieldsStation Statistics Window Soft Error Fields Station Timer Statistics Window Station Timer Statistics Window Fields Port Performance GraphsTotal Errors Red Port Performance Graph StatisticsConfiguring the Port Performance Graph Token Ring Statistics Token Ring Alarms Ring-Level Alarm LimitsAccessing the Alarm Limits Window Ring-Level Alarm Limits for Network EventsRing-Level Station Alarms Token ErrorsSetting Ring-Level Alarm Limits LineStation-Level Alarm Limits Accessing the Station Alarm Limits Window from the Port MenuToken Ring Alarms Setting Station-Level Alarm Limits Station Alarm Limits WindowToken Ring Alarms Station List and Station Map Station List WindowAddress Mode Station List Window FieldsGeneral Fields Number of Nodes/StationsViewing Station Statistics Station FieldsViewing Station Timer Statistics Setting Station AlarmsRemoving a Station from the Ring Using the MAC/Canonical Button Viewing the Station Port Performance GraphPrinting the Station List Resetting Counters Station MapStation Map Window Fields Number of NodesViewing the Station Map Station Pop-up Text BoxesStation Map with Text Boxes Node AddressStation Command Menu Manipulating the Station Map Magnifying a Portion of the MapRotating the Station Map Resizing the Station Map Window Station List and Station Map Symbols IndexIndex-2 Index-3 Index-4