Enterasys Networks RBT-4102 manual Using the CLI

Using the CLI

5.Specify the management VLAN ID for the access point:

The management VLAN is for managing the access point. For example, the access point allows traffic that is tagged with the specified VLAN to manage the access point via remote management, SSH, SNMP, Telnet, and so forth. VLAN management is enabled by default, and cannot be disabled.

Note: You must set up the network switch port to support tagged VLAN packets from the access point. The switch port must also be configured to accept the access point’s management VLAN ID and native VLAN IDs.

RoamAbout 4102(config)#management-vlanid 10

Reboot system now? <y/n>:y

Username: admin

Password:********

6.Refer to the RoamAbout RBT-4102 Wireless Access Point Configuration Guide for advanced configuration.

3-5