Up Time, Port Status, Boot Prom, Date | Enterasys Networks STS16-20

Using the STS16-20 Chassis View

¥Magenta indicates a temporary stand-by mode, while the STS16-20 responds to a physical change in the switch.

¥Blue indicates an unknown contact status; polling has not yet been established with the STS16-20.

¥Red indicates that the STS16-20 is not responding to device polls (the device is off line, or device polling has failed across the network).

Up Time

The amount of time that the STS16-20 has been running without interruption since the last start-up, displayed in an X day(s) hh:mm:ss format.

Port Status

Indicates the Port Status display selection currently in effect; see Selecting a Port Status Display, page 2-6, for details. The default port status display is Admin; if you have not changed the port status selection since launching the Chassis View, this Þeld will display Default.

MAC

The physical layer address assigned to the interface associated with the IP Address used to deÞne the device icon when it was added to NetSight Element manager. MAC addresses are hard-coded into the device, and are not conÞgurable.

Boot Prom

The revision of BOOT PROM installed in the STS16-20.

Firmware

The revision of device Þrmware installed in the switchÕs ßash memory.

Time

The current time set in the internal clock of the STS16-20, displayed in a 24-hour hh:mm:ss format.

Date

The current date set in the internal clock of the STS16-20, displayed in a mm/dd/yyyy format.

NOTE

For some Þrmware versions, the Time, Date, and Boot Prom Þelds will display as N/A (not available).

IP Address

The IP (Internet Protocol) address assigned to the device will appear in the title bar of the Chassis View.

Viewing Chassis Information

2-3