Using the
NOTE |
For this release, the Load port status option will display three dashes and maintain the color code of the most recently selected Port Status option for any unlinked ports (i.e. ports for which the Operator status is OFF).
Errors
Displays the percentage of the total number of valid packets processed by each port during the last polling interval that were error packets. This percentage reßects the number of errors generated during the last polling interval by devices connected to that port compared to the total number of valid packets processed by the port.
NOTE |
The polling interval is set via the Tools Ñ> Options window from the primary window menu bar. Refer to the NetSight Element Manager UserÕs Guide for more information on setting device polling intervals.
I/F Mapping
Displays the index value associated with each port on the
I/F Speed
Displays the speed (4 or 16 Mbps) of the network segment connected to each port.
NOTE |
For this release, the I/F Speed port status option will display a zero and maintain the color code of the most recently selected Port Status option for any unlinked ports (i.e. ports for which the Operator status is OFF).
I/F Type
Displays the interface type of each port on the
Port Status Display Color Codes
The port status display options incorporate color coding schemes. For the Admin, and Operator display options the color coding scheme is described above.
For all other port status display selections Ñ Load, Errors, I/F Mapping, I/F Speed, and I/F Type Ñ color codes will reßect the most recently selected option which incorporates its own color coding scheme.
Viewing Chassis Information |