Enterasys Networks IRM2 manual To access the port-level Timer Statistics window

Page 48

Statistics

1.Click on Repeater on the Chassis View menu bar to display the repeater menu.

2.Drag down to Timer Statistics... and release. The Repeater Timer Statistics window, Figure 3-2, will appear.

Figure 3-2. Timer Statistics Window

To open the board-level Timer Statistics window:

1.Click on the appropriate Board number to display the board menu.

2.Drag down to Timer Statistics... and release. The board-level Statistics window will appear.

To access the port-level Timer Statistics window:

1.Click on the appropriate Port to display the port menu.

2.Drag down to Timer Statistics... and release. The port-level Statistics window will appear.

The Board and Port Timer Statistics windows are the same as the Timer Statistics window displayed in Figure 3-2, except that they display statistics applicable to the board or port.

The Timer Statistics windows display the elapsed, average, and peak values for the following statistics:

Packets

Displays the elapsed, average, and peak number of good packets processed by the device, board, or port during the user-defined time interval.

Errors

Displays the elapsed, average, or peak number of errors received by the device, board, or port during the user-defined time interval.

3-6	Timer Statistics

Image 48

Contents IRM2 Users Guide Page Virus Disclaimer Page Restricted Rights Notice Page Contents Chapter Trap Selection StatisticsChapter Redundancy IndexContents Viii Using This Manual IntroductionRelated Manuals IntroductionUsing the Mouse Software ConventionsCommon IRM2 Window Fields Device NameUsing Window Buttons Using On-line Help Getting HelpGetting Help from the Enterasys Global Call Center Hours a day, 365 days a yearIntroduction Getting Help IRM2 Chassis View Viewing Chassis Information Front Panel Information Port Locking/UnlockingConnection Status Port StatusBoot Prom Menu StructureFirmware TimeIRM2 Chassis View Menu Structure Device MenuView Menu Port Status MenuRepeater Menu Utilities Menu Help MenuBoard Menu MIM Port Status Displays Port MenusLoad Port Type StatusErrors Physical Chassis View Port Status Color CodesChassis Manager Window Viewing Hardware Types Device TypeSetting the Device Date and Time Managing the HubResetting Device Counters Restarting the DeviceConfiguring the Front Panel Repeater Port Association Repeater Port AssociationSetting a Board Name Enabling BoardsEnabling and Disabling Ports Viewing I/F Summary InformationIndex TypeDescription Physical StatusRaw Counts Rate Viewing Interface DetailError AddressUnicast Non-UnicastUnknown Protocol Received only Packets Received Received onlyTransmit Queue Size Transmit only Packets Transmitted Transmit onlyTesting and Disabling the Current Interface Using the Applications menuStatistics StatisticsAccessing the Statistics Windows StatisticsStatistics Defined BytesPackets Using the Total and Delta Radio Buttons Hard ErrorsSoft Errors CollisionsTimer Statistics Accessing the Timer Statistics WindowsTo access the port-level Timer Statistics window Setting the Timer Statistics Interval Summary StatisticsAccessing the Summary Statistics Windows Configuring Summary Statistics Accessing the Performance Graph Windows Performance GraphTotal Errors Configuring the Performance Graph Source Address Functions Find Source AddressUsing Port Locking and Unlocking Source Address FunctionsLock/Unlock Ports Window Using Source Addressing Setting the Device Ageing Time Device Ageing Time Window Alarm Limits Accessing the Alarm Limits WindowsAccessing the Alarm Limits Windows Alarm Limits Collisions Errors of Type Broadcast PacketsConfiguring Alarms Setting the Alarm Limits Time IntervalWithin Setting Alarm Limits Alarm Interval WindowAlarm Limits Accessing the Trap Selection Windows Trap SelectionTrap Definitions Link State TrapsSegmentation Traps Source Address TrapsConfiguring Traps Accessing the Redundancy Window RedundancyRedundancy Establishing Redundancy Selecting and Naming a CircuitEntering the Physical Addresses of Devices to be Polled Circuit Name WindowAssigning Backup Ports and Port Priority to the Circuit Setting the Polling Interval and Number of Retries Polling Interval WindowActivating the Circuit Testing the Circuits Reconfiguring a Circuit Test Time of Day WindowChanging Port Status Resetting a Circuit Redundancy Reset Warning WindowRedundancy Index Index-2 Index-3 Index Index-4