Introduction
IP Address
Displays the device’s IP (Internet Protocol) address. This will be the IP address used to define the device icon. IP addresses are assigned via Local Management for the IRM2; they cannot be changed via NetSight Element Manager.
Location
Displays the
MAC Address
Displays the
Informational fields describing the boards and/or ports being modeled are also displayed in most windows:
Board Number
Displays the number indicating the position of the monitored board in the chassis.
Board Name
Displays the
Port Number
Displays the number of the monitored port.
Port Name
Displays the
Active Users
Indicates the number of users processing information through the IRM2 repeater, board, or port, as determined by MAC addresses.
Uptime
Displays the amount of time, in a days hh:mm:ss format, that the IRM2 has been running since the last
Using Window Buttons
The 
button that appears at the bottom of most windows allows you to exit a window and terminate any unsaved changes you have made. You may also have to use this button to close a window after you have made any necessary
changes and set them by clicking on an 
, 
, or 
button.
Software Conventions |