5 Management Software Guide
Select ports to config:
Please select a port to set settings
Port Enable:
The default is to enable the port. Check the “Disable” if you want to disconnect the port
Tx Bandwidth Control
Enable this function will restrict the given port’s sending speed to the selected value.
Rx Bandwidth Control
Enable this function will restrict the give port’s receiving speed to the selected value
Speed Advertised
Changing the speed and duplex mode of a given port.
Global Configuration Submenu
Global Configuration is used to configure the global port control registers. Press the Refresh button to read the status of the registers. Press the Update button to set the registers as shown in this frame.
24
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0