Ecom Instruments ECOM-EF24F2G user manual Product Overview, Introduction, Management Features

1 Product Overview

1 Product Overview

Introduction

Windows Remote Management software

Conventionally, configuring a switch's smart management will require users to attach the computer (serial or printer port) directly to the switch's console port. With ECOM-ES24F2G's in-band management capability, users can configure the switch through the Ethernet network. The included Windows management software provides a very simple point-and-click interface to set all the functions. Users can even backup settings to be restored in the future. Best of all, the management utility can configure several switches using the same utility.

Management Features

The ECOM-ES24F2G is equipped with many practical management functions.

Per-port bandwidth control

allow limiting the outgoing and incoming bandwidth separately for each port .

Central Switch management:

Configure several switches at the same time.

802.1Q tag VLAN

enables VLAN assignment across different switches.

VLAN filter

provide controls to let single-cast, multi-cast, or broadcast traffic to pass between VLANs.

Quality of Service

for multimedia applications: the 802.1p compliance provide priority traffic management based on port, vlan-tag, or TCP/IP TOS information.

Link aggregation

The LACP(Link Aggregation Control Protocol) increase the uplink speed by allowing several ports(Trunk Group) to link between the switches. The switch allows up to 7 trunk groups in 2 or 4 ports. Please make sure that switches on both side are setup for the trunking function.

IGMP Snooping

for IP multicast group management

1

ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0