The Nº390S incorporates AES/EBU and S/PDIF electrical output connectors for use with either digital recorders or with outboard digital processors. (See Rear panel, Nº390S.)
Using appropriate cables, connect the appropriate outputs on your Nº390S to your external digital components.
The Nº390S incorporates sophisticated inter-component communications capabilities when Linked to compatible Mark Levinson components. (See “Communication Ports” in Rear panel, Nº390S.) If you own compatible Mark Levinson components, connect them to the Nº390S with an eight-conductor modular cable as described on p. 25. You may find that you need to cycle power off and on once after making this connection for the first time (if making the connection to a previously operating component), in order to ensure that all components in the chain are aware of each other’s presence. Engaging PLAY on the transport once from STOP will complete the Link connection by activating the communications bus between the components. (When using a preamplifier, you must also name the appropriate input “No390S” as described in the preamp’s manual in order to complete the Link.)
To help with special installations and custom cabinetry, drawings are included in this manual. (See Dimensions).
37
The Nº390S provides both balanced (via XLRs) and single-ended analog outputs. Either set of outputs may be connected either to a preamplifier or (with the variable output feature engaged) directly to a power amplifier. It has been our experience that balanced interconnection provides superior performance, particularly if long runs of cable are required.
Using appropriate cables, connect the appropriate outputs on your Nº390S to your preamplifier or power amplifier.