Mark Levinson N390S owner manual Unpacking and Placement

Page 8

Unpacking the Nº390S

Important!

Remove the Transport

Screw

8

Warning!

Placement of the

Nº390S

Unpacking and Placement

Unpack your Nº390S CD Processor and remove all accessories from the carton.

Keep all packing materials for future transport of your Nº390S. Shipping your new component in anything other than its purpose-designed packing material may result in damage that is not covered by the warranty.

Included with your new Mark Levinson CD processor is a pair of knit, white gloves designed to assist you in the initial unpacking and placement of your new purchase. Please accept them as a token of our appreciation for having purchased one of our products.

Place the Nº390S CD Processor upside-down on a soft, clean surface. Remove the transport screw from the bottom of the unit and save it with the packing materials for future use.

The transport screw must be removed before operating the Nº390S, since it immobilizes the transport mechanism during shipping to prevent damage. This screw must also be replaced before shipping the unit.

The Nº390S should be placed close to your digital audio processor, thus keeping interconnect cabling reasonably short. It may be placed on a shelf or in a cabinet where it is convenient to operate, but should not be rack mounted, so as to leave access to the rear panel power switch.

Image 8

Contents Nº390S Processor Page Important Safety Instructions Customer Support Table of Contents Page Page Unpacking and Placement Unpacking the Nº390S Remove the Transport Screw PlacementOperating Voltage Frequency Connect the Nº390S to AC power Quick StartTurn off your associated components Remove the transport screw from the bottom of the Nº390SBreak-in Period 4a. If going direct from the Nº390S to an amplifierSpecial Design Features New GenerationPage Page Page Front Panel, Nº390S Display intensityInfrared Transceiver within display Special Mode IndicatorTrack Indicator Time Indicator Mode buttonDrawer Hdcd indicatorRepeat button Prev/rew button Mode and mode + buttonsDisc repeat LED Time on disc and time remaining LED indicators Track repeat LEDNext/f.fwd button Stop/drawerPlay button Pause buttonStandby & Standby LED AC power input and switch Rear Panel, Nº390SDigital Outputs Digital inputs Balanced analog outputsSingle-ended analog outputs External IR inputCommunication ports Standard Link Cables Amplifier Link Cables Remote Control, Nº390S Mode buttons Stop/dwrPause B repeat buttonNumeric Keypad Other Operational Buttons Time PolarityRpt disc/trk Mute+ volume VolumeBattery Compartment Analog Input SwitchingConditions that Affect IR Performance Optimum IR Reception WindowSetup and Installation Connecting AC Mains Connecting Digital Audio SourcesPage Basic Operation Loading a CD Playing a CD Random PlayTo load a CD Press stop/drawerNavigating the Disc Direct Time Access To do thisPause Repeat Disc Repeat Track Important Note Programming the Nº390SRepeat Polarity Introduction to Play Lists Assembling a Play List To assemble a new play listProgramming by Omission Saving a Play List Reviewing a Play ListTo save a play list To review your play list before playing itTo do so Deleting a Track from a Play List Adding a Track to aTo delete a selection To temporarily override a previously saved play list Erasing Play Lists from Memory Why Polarity Programming?Overriding a Play List Press and hold the mode + button. The display will show Whole-Disc Polarity Programming Track-by-Track PolaritySpecial Functions Overriding a Polarity ProgramFixed/Variable Volume Sound Menu ItemsSilent/Audible Cueing Balance ControlLink Menu Items Locked Volume Standby LinkName Link Play LinkAUX IN’s Menu Items Display Link Input NamesChanging Link Options Sleep Timer To change between manual and timed/ automatic standby Using Learning Remote ControlsTeaching Nº390S Front Panel Commands Teaching Other Nº390S Commands Place the Nº390S in its front panel teaching mode Command Display Troubleshooting Nº390S won’t function, and the display is darkDisplay is lit, but there is no output Nº390S display reads no DiscRemote Control doesn’t operate the Nº390S Linked functions don’t workCare and Maintenance Specifications Output Complement Other I/O Dimensions Installation Notes

Related manuals

Manual 4 pages 7.64 Kb