DeWalt R510 manual Mechanical, Chassis Description, Dimensions and Weight

Dell

4 Mechanical

4.1 Chassis Description

PowerEdge R510 chassis is a 2U rack system. The chassis is not swappable. Supported configurations are detailed in Table 3.

Table 3. Supported Chassis Configurations

4-HDD Configuration	8-HDD Configuration	12-HDD Configuration
5 x cabled 3.5‖ HDD bay	8 x hot-swap 3.5‖ or 2.5‖ HDD bay	12 x hot-swap 3.5‖ or 2.5‖ HDD
Non-Redundant 480W PSU	750W redundant PSU (n+0 or n+1	bay + 2 x internal cabled 2.5‖ HDD
Quad pack diagnostic LED	option)	750W redundant PSU (available for
		n+0 or n+1 option)
	11G diagnostic LCD (identical to the
	PowerEdge R710)	Rack-ear diagnostic LED
		Redundant system cooling

4.2 Dimensions and Weight

	Table 4.	PowerEdge R510 Weight
	4-HDD Configuration		8-HDD Configuration	12-HDD Configuration
Form Factor			2U Rack
Dimension	3.40 x 17.19 x 24.09 (in);			3.42 x 17.53 x 26.17 (in);
(HxWxD)	86.4 x 436.6 x 610.2 (mm)			86.7 x 445.2 x 664.6 (mm)
Max Weight	16 Kg/35.2 lbs		22.5 Kg/49.5 lbs	29.0Kg/63.8lbs
Empty Weight	13.6 Kg/29.92 lbs		13.5 Kg/29.7 lbs	15.85 Kg/34.87 lbs

Table 5. PowerEdge R510 Dimensions

Note:

Measurements in this table correspond to the diagram shown in Figure 3.

	PowerEdge
	R510
	Configuration	Xa	Xb	Y	Za w/ bezel	Za w/o bezel	Zb*	Zc
4 and 8 HDD							610.2	642.0
		482.4 mm	436.6 mm 86.4 mm		35.0 mm	21.0 mm	mm	mm
12 HDD		482.4 mm	445.2 mm 86.76 mm 35.0 mm			21.0 mm	664.65	697.05
							mm	mm

*Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.

PowerEdge R510 Technical Guide 18