DeWalt R510 manual Memory, Overview, DIMMs Supported, Mirroring

Page 43

Dell

7 Memory

7.1 Overview

Please carefully review this entire section

Features of the PowerEdge R510 memory include:

3 channels per processor

Support for registered ECC DDR3 DIMMs or Unbuffered ECC DDDR3 DIMMs.

DDR3 speeds of 800/1066/1333 supported (Max memory clock speed support is pending on the processors used. Refer to table in Section 8C.)

8 (2/1/1) DIMM sockets (128GB Maximum capacity) Support for Single Rank, Dual Rank, and Quad Rank DIMMs

Intel Xeon processor 5600 series also supports Low Voltage DIMMs and sparing feature

7.2 DIMMs Supported

The following DIMMs are supported by the PowerEdge R510-4, 8, and 12:

1GB, DDR3 UDIMM, 1066 w/ECC

1GB, DDR3 UDIMM, 1333 w/ECC

1GB, DDR3 RDIMM, 1066 w/ECC

1GB, DDR3 RDIMM, 1333 w/ECC

2GB, DDR3 UDIMM, 1066 w/ECC

2GB, DDR3 UDIMM, 1333 w/ECC

2GB, DDR3 RDIMM, 1066 w/ECC

2GB, DDR3 RDIMM, 1333 w/ECC

4GB, DDR3 UDIMM, 1066 w/ECC

4GB, DDR3 UDIMM, 1333 w/ECC

4GB, DDR3 RDIMM, 1066 w/ECC

4GB, DDR3 RDIMM, 1333 w/ECC

The PowerEdge R510-8 and 12 also support:

8GB, DDR3 RDIMM, 1066 w/ECC

8GB, DDR3 RDIMM, 1333 w/ECC

16GB, DDR3 RDIMM, 1066 w/ECC

7.3 Mirroring

In mirroring mode, the PowerEdge R510 has identical memory configuration in Channel_0 and Channel_1; it does not have memory in Channel_3. When mirroring mode is enabled, usable memory capacity is half of the physical memory installed.

7.4Sparing

Intel has added sparing back with Xeon processor 5600 series. In sparing mode, you must have identical memory in Channel_0, Channel_1 and Channel_2. For the R510, memories are installed in A1, A2 and A3 to enable the sparing mode. With sparing mode is enabled, usable memory capacity is 2/3 of the physical memory installed.

PowerEdge R510 Technical Guide

43

Image 43
Contents Dell Product Name PowerEdge R510 Technical Guide Table of Contents Bios Tables Figures Product Description OverviewPage Product Comparison Comparison of PowerEdge Server FeaturesDiagnostic LCD 1Intel Xeon Processor 5500 and 5600 Series New TechnologiesDetailed Information Sparing2DDR3 Memory Technology 1PCIe Generation3Next Generation Dell Embedded Server Management System Overview Product Features SummaryHxWxD HDD/SSD Virtualization DatabaseMicrosoft Dell Mechanical Dimensions and WeightChassis Description System Dimensions PowerEdge R510-4 HDD Configuration Front Panel View and Features1NMI Button 3Power Button/Power LED2System ID Button USB Controller Priorities 4Video Connector Rack Systems5USB Connectors Power Button Behavior under ACPI/Non-ACPI Operating Systems7Hard Drive Activity LED 6DVD/CD8Key Lock With Redundant Power Supply for PowerEdge R510-8 Back Panel View and FeaturesLeft Side View Redundant PSUInternal Chassis Views Battery HolderPowerEdge R510-12 Internal View ReadyRails Static Rails for 4-post & 2-post Racks support ReadyRails Sliding Rails for 4-post Racks dimensionsRails and Cable Management ReadyRailsTM Sliding Rails for 4-post Racks supportR510 Sliding Rails with CMA R510 Sliding Rails without CMA1Fan module FansFan Module for R510-4 2Fan Location and InstallationFan Location Fan Connector LocationsCabling Information CablingSecurity Bezel LockTop Cover Intrusion SwitchUSB Key Hard Drive SecurityField Replaceable Units FRU BatteryPower Supplies Power, Thermal, AcousticThermal Environmental SpecificationsEnergy Star Compliance Maximum Input AmpsOperating/Non-Operating Storage Requirements Acoustics Acoustics of 8-HDD Chassis Acoustics of 4-HDD ChassisAcoustics of 12-HDD Chassis Definitions Supported Processors ProcessorsMirroring MemoryOverview DIMMs Supported2System Memory Interface Intel 5500 Chipset FeaturesChipset 1Intel QuickPath InterconnectIntel ICH10R South Bridge Bios Support BiosPower Management ConfigurationAcpi Summary of Power Management Features Power Management State Transition Supported Power ProfilesUefi and Acpi Supported CPU Acpi States/Turbo ModeQDF# UefiUefi is Uefi is not Uefi SummarySlot Location Bandwidth Physical Slot Height Length 10 I/O SlotsRiser 1 Detail Riser 1 Slot InformationRiser 2 Detail Boot Order for RiserPCI Card Dimensions PCI Card Dimensions RiserBandwidth Slot Location Height Length Riser 2 Slot InformationDrives StorageNo Mixed RAID ConfigurationsRaid Configurations for the PowerEdge R510-4 HDD PowerEdge R510-4 Factory ConfigurationAdd Card Raid Configurations for the PowerEdge R510-8Add CardMixed SSD + Mixed SAS +Must be all HDDs Ex. Min SAS + MixFactory Configuration RAID Configuration for PowerEdge R510-12R51012 Mixed HDD SAS + Sata Factory Configuration SAS R510-12 Mixed HDD SSD + SAS Factory ConfigurationMin Max Type Name Description Factory ConfigurationR510-12 Mixed HDD Hot-swap 3.5 SAS + Hot-swap 3.5 Sata + internal 2.5 SASTape Drives Optical DrivesVideo Microsoft Operating Systems Supported Operating SystemsLinux Operating Systems Operating Systems Version Factory Install Logo/CertSupported Virtualization Operating Systems VirtualizationServer Management Systems ManagementEmbedded Server Management IDRAC6 Express Lifecycle Controller and Unified Server ConfiguratorUnified Server Configurator Features and Description Feature DescriptionIDRAC6 Enterprise Features List for BMC, iDRAC6, and vFlashPowerEdge R510 Technical Guide FeatureDell USB peripherals PeripheralsExternal Storage Packaging Options Single Pack Dimensions and WeightsAppendix a R510 Volatility Tables PowerEdge R510 VolatilityIDRAC6 Enterprise TPM ID Eeprom Volatility Data Writing and PurposeBackplane firmware HDD status, etc How is data input to this memory? Planar Methodology for Data Input to MemoryControl Panel Power SupplyHow is data input to this memory? Chipset BackplaneRAM Methodology for Memory and ClearingPlanar Nvramclr jumper or Remove AC cord, remove cover SAS 6/iR Integrated