DeWalt R510 manual 10 I/O Slots, Riser 1 Detail, Riser 1 Slot Information

Dell

10 I/O Slots

10.1 Overview

The PowerEdge R510 system provides two configurations for I/O slots:

∙Riser 1 (default offering): Three PCIe slots (x4, x4, x8 bandwidth; all w/ x8 slots) + One internal storage slot (x4 bandwidth w/ x8 slot for SAS or PERC integrated cards only)

∙Riser 2 (for GPGPU ONLY): One PCIe slot (x16 bandwidth and slot) + One internal storage slot (x4 bandwidth w/ x8 slot for SAS or PERC integrated cards only)

10.1.1Riser 1 Detail

Figure 32. Riser 1

Table 20. Riser 1 Slot Information

Slot Location	Bandwidth	Physical Slot	Height	Length
Slot1 (Gen2)	PCIe x4	PCIe x8	Full Height	Half Length
Slot2 (Gen2)	PCIe x4	PCIe x8	Full Height	Full Length
Slot3 (Gen2)	PCIe x8	PCIe x8	Full Height	Half Length
Slot4 (Gen2)	PCIe x4	PCIe x8	For dedicated storage controller

•One x4 PCIe Gen2 slot (slot 1, x8 connector with x4 routing) for full-height half-length cards, connected to the IOH

•One x4 PCIe Gen2 slot (slot 2, x8 connector with x4 routing) for full-height full-length cards, connected to the IOH

•One x8 PCIe Gen2 slot (slot 3, x8 connector with x8 routing) for full-height half-length cards, connected to the IOH

•One x4 PCIe Gen2 slot (slot 4, x8 connector with x4 routing) for dedicated storage controller card, connected to the IOH

•System supports 25W maximum power for slots 2 and 3 and 15W for slot 1 and 4

•The lower power support on slots 1 and 4 is due to system thermal limitations

•The PowerEdge R510 does not support hot-swapping of PCIe cards

PowerEdge R510 Technical Guide 53