DeWalt R510 manual Methodology for Data Input to Memory, How is data input to this memory? Planar

Dell

Table 35. Methodology for Data Input to Memory

		How is data input to this memory?
Planar
System BIOS SPI Flash		Loading flash memory requires a vendor-provided firmware file and loader program which is
		executed by booting up the system from a floppy or OS-based executable containing the
		firmware file and the loader. System loaded with arbitrary data in firmware memory will not
		operate.
LOM Configuration		Loading flash memory requires a vendor-provided firmware file and loader program which is
Data		executed by booting the system from a floppy or OS-based executable containing the
		firmware file and the loader. LOMs loaded with arbitrary data in firmware memory will not
		operate.
iDRAC6 Controller
ROM		N/A
iDRAC6 controller
RAM		iDRAC embedded system
System CPLD		Loading flash memory requires a vendor-provided firmware file and loader program which is
		executed by booting the system from a floppy or OS-based executable (currently only DRMK
		utility support) containing the firmware file and the loader. A system loaded with arbitrary
		data in CPLD memory will not operate.
System CPLD		Not used
iDRAC6 Express		iDRAC OS: Loading flash memory requires a vendor-provided firmware file and loader program
Internal Flash		which is executed by booting the system from a floppy or OS-based executable containing the
		firmware file and the loader. System loaded without a good iDRAC firmware image yields a
		non-functional iDRAC.
		Managed Services Repository: Various partitions are loaded via vendor-provided firmware file
		and loader program just like iDRAC OS.
System RAM		System OS
TPM ID EEPROM (Plug
in module only)		Factory load only
TPM Binding EEPROM
(on China planar
only)		BIOS only
iDRAC6 SDRAM		Embedded iDRAC OS for 108MB and 8MB for VGA frame buffer
iDRAC6 FRU		Factory and iDRAC embedded OS
iDRAC6 Boot Block		Loading flash memory requires a vendor-provided firmware file and loader program which is
Flash		executed by booting the system from a floppy or OS-based executable or out-of-band
		firmware updates across the management network. Bad content makes the iDRAC inoperable
		and is unrecoverable in the customer environment. The lifecycle log is automatically updated
		by the iDRAC as various system component firmware, hardware, and software versions are
		changed.
Trusted Platform
Module		Using TPM-enabled operating systems
	78
PowerEdge R510 Technical Guide