Cyclades PR2000 Testing the WAN Interfaces, Figure A.3 General Statistics Table

Page 42

Cyclades-PR2000

Testing the WAN Interfaces

The WAN interface can be tested using ping as described in the previous section. If the ping is not successful, check the routing table to see if a route to the destination exists (INFO =>SHOW ROUTING TABLE). The menu items INFO =>SHOW STATISTICS =>SWAN and INFO =>SHOW STATUS =>SWAN may also provide useful information.

If the router does not seem to be working properly, and none of the above advice has located the problem, the hardware interfaces should be tested. This will determine if the problem is hardware, software, or configuration related.

This test will be between the two SWAN interfaces.

1Connect the cable labeled “cross” between the two interfaces to be tested.

2Choose DEBUG =>HARDWARE TESTS =>NEW RUN-IN from the menu. Test options for each interface are shown. Choose Yes for the two SWAN RSV interfaces and No for all other tests. Let the test run for a while. Pressing “G” will show the General Statistics Table (Figure A.3).

INTERFACE

 

STATUS

 

BYTES

 

PACKETS

 

REMOTE

Slt

Prt

Board H

Lp

E%%

S

Sent Recv Sent Recv

Slt

Prt

Name

1

1

SWAN

M

0

0.00

D

1512

1466

4

4

2

1

LOCAL

2

1

SWAN

S

0

0.00

D

1833

1510

5

4

1

1

LOCAL

FIGURE A.3 GENERAL STATISTICS TABLE.

The first three columns show which interfaces are being tested.

The H column shows which board is master and which is slave.

The LP column indicates how many test loops have been completed.

The E%% column shows how many errors per 1000 packets have occurred.

Appendix A - Troubleshooting

42

Image 42
Contents Cyclades-PR2000 Cyclades-PR2000 Quick Installation Manual FCC Warning StatementCanadian DOC Notice Table of Contents Appendix B Hardware Specifications IndexHOW to USE this Manual Installation Assumptions Convention Description CONFIG=INTERFACE=LText Conventions IconsCONFIGURATION=ALL Cyclades Technical Support and Contact InformationCyclades Corporation USAWhat is in the BOX HOW to Connect the RJ-45 to DB-25 Adapter Cable Using CyROS Menus Login Prompt and Main MenuLmi-typeANSI, Group of four, None Ansi CONFIGURATION=TO Flash Special KeysCyros Management Utility CyROS Management UtilityCyclades-PR2000 STEP-BY-STEP Instructions for Common Applications IP MTU Step ONEParameter Example Your Application NATStep TWO Step ThreeSwan Network Protocol IP Menu Parameters Step Four MlpppStep Five Step SIXStep Seven Step EightStep Nine Instructions for creating a backup of the configuration file Instructions for listing the configurationExample 2 a LAN-to-LAN Example Using Frame Relay 35 DSU/CSU10 Ethernet Network Protocol Menu Parameters 11 Swan Physical Menu Parameters 12 Swan Network Protocol IP Menu Parameters Snap IP LMICIR 14 DLC Configuration Menu Parameters Dlci15 Static Route Menu Parameters Instructions for creating a backup of the configuration file Example 3 Link Backup Secondary Backup Link Bandwidth 64 kbps17 Traffic Control Parameters Swan 18 Addition of the Primary Main LinkThis parameter has no effect for link backup. For load 20 Multilink Circuit Attributes21 Static Backup Route Parameters Instructions for creating a backup of the configuration file Boot Code step TestWhat to Do if the Router Does Not Work or Stops Working Event CPU LED Morse codeTesting the Ethernet Interface Testing the WAN Interfaces Figure A.3 General Statistics TableCyclades-PR2000 Cyclades PR2000 LEDsPhysical Specifications General SpecificationsPower Requirements external DC adapter SafetyExternal Interfaces WAN InterfacesLAN Interface Asynchronous Interface Console InterfaceCables Straight-Through CableDB-25 M.34 Adaptor Figure B.7 DB-25 M.34 Adaptor DB-25 Female to M.34 MaleASY/Modem Cable Cross CableGnd DB-25 Loopback Connector Figure B.10 Loopback Connector DB-25 MaleIndex Cyclades Philippines

PR2000 specifications

The Cyclades PR2000 is a versatile and powerful gateway designed to provide seamless connectivity and management of various network devices. It is particularly favored in environments that require high availability and reliability, such as data centers, enterprise networks, and remote locations.

One of the main features of the Cyclades PR2000 is its robust support for both serial and Ethernet connections. This flexibility allows users to connect legacy devices with serial ports alongside modern Ethernet-enabled equipment. This makes it ideal for organizations transitioning from older technologies while still needing to maintain support for existing infrastructure.

The PR2000 is equipped with advanced remote management capabilities, which includes secure access via SSH and a web-based interface. This enables system administrators to manage devices from anywhere, significantly reducing the need for physical presence at the hardware site. Moreover, it supports SNMP (Simple Network Management Protocol), enhancing monitoring capabilities and allowing easy integration with existing network management systems.

Scalability is another standout characteristic of the Cyclades PR2000. It can support multiple user sessions simultaneously, allowing diverse teams to access multiple devices concurrently without performance degradation. This is particularly beneficial for large enterprises where multiple IT personnel might need to access different systems at the same time.

The device incorporates powerful security features, including user authentication, role-based access control, and full SSL support, ensuring that data transmitted over the network remains protected. It adheres to industry standards for encryption and security protocols, making it a reliable choice for sensitive data transmission in business-critical environments.

The PR2000 is designed with redundancy in mind, featuring failover mechanisms that ensure continuous operation in case of hardware or connection failures. Its reliability is crucial for businesses that depend on uninterrupted access to networked devices.

Additionally, the user-friendly management tools included with the Cyclades PR2000 reduce the learning curve for new users. Its intuitive interface and comprehensive documentation aid in quick deployment and configuration, allowing organizations to harness its capabilities without extensive training.

In summary, the Cyclades PR2000 is an exceptional choice for organizations looking to enhance their network management capabilities. With its flexible connectivity options, advanced security features, remote management capabilities, and scalability, it stands out in the market as a reliable and efficient solution for maintaining and monitoring diverse network environments.