Cypress CY8C24094 manual Getting Started, Additional System Resources, PSoC Device Characteristics

Page 4

CY8C24094, CY8C24794 CY8C24894, CY8C24994

3.1 Additional System Resources

System Resources, provide additional capability useful to complete systems. Additional resources include a multiplier, decimator, low voltage detection, and power on reset. Brief state- ments describing the merits of each resource follow.

Full-Speed USB (12 Mbps) with 5 configurable endpoints and 256 bytes of RAM. No external components required except two series resistors. Wider than commercial temperature USB operation (-10°C to +85°C).

4. Getting Started

The quickest way to understand PSoC silicon is to read this data sheet and then use the PSoC Designer Integrated Development Environment (IDE). This data sheet is an overview of the PSoC integrated circuit and presents specific pin, register, and electrical specifications.

For in depth information, along with detailed programming details, see the PSoC® Programmable System-on-Chip Technical Reference Manual for CY8C28xxx PSoC devices.

Digital clock dividers provide three customizable clock frequencies for use in applications. The clocks can be routed to both the digital and analog systems. Additional clocks are generated using digital PSoC blocks as clock dividers.

Two multiply accumulates (MACs) provide fast 8-bit multipliers with 32-bit accumulate, to assist in both general math and digital filters.

Decimator provides a custom hardware filter for digital signal processing applications including creation of Delta Sigma ADCs.

The I2C module provides 100 and 400 kHz communication over two wires. Slave, master, multi-master are supported.

Low Voltage Detection (LVD) interrupts signal the application of falling voltage levels, while the advanced POR (Power On Reset) circuit eliminates the need for a system supervisor.

An internal 1.3V reference provides an absolute reference for the analog system, including ADCs and DACs.

Versatile analog multiplexer system.

For up-to-date ordering, packaging, and electrical specification information, see the latest PSoC device data sheets on the web at www.cypress.com/psoc.

4.1 Application Notes

Application notes are an excellent introduction to the wide variety of possible PSoC designs. They are located here: www.cypress.com/psoc. Select Application Notes under the Documentation tab.

4.2 Development Kits

PSoC Development Kits are available online from Cypress at www.cypress.com/shop and through a growing number of regional and global distributors, which include Arrow, Avnet, Digi-Key, Farnell, Future Electronics, and Newark.

4.3 Training

Free PSoC technical training (on demand, webinars, and workshops) is available online at www.cypress.com/training. The training covers a wide variety of topics and skill levels to assist you in your designs.

3.2 PSoC Device Characteristics

Depending on your PSoC device characteristics, the digital and analog systems can have 16, 8, or 4 digital blocks and 12, 6, or 4 analog blocks. The following table lists the resources available for specific PSoC device groups. The device covered by this data sheet is shown in the highlighted row of the table

Table 3-1. PSoC Device Characteristics

PSoC Part

Digital I/O

Digital Rows

Digital Blocks

Analog Inputs

Analog Outputs

Analog Columns

Analog Blocks

SRAM Size

Flash Size

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CY8C29x66

up to

4

16

12

4

4

12

2K

32K

 

64

 

 

 

 

 

 

 

 

CY8C27x43

up to

2

8

12

4

4

12

256

16K

 

44

 

 

 

 

 

 

Bytes

 

CY8C24x94

56

1

4

48

2

2

6

1K

16K

CY8C24x23A

up to

1

4

12

2

2

6

256

4K

 

24

 

 

 

 

 

 

Bytes

 

CY8C21x34

up to

1

4

28

0

2

4[1]

512

8K

 

28

 

 

 

 

 

 

Bytes

 

CY8C21x23

16

1

4

8

0

2

4[1]

256

4K

 

 

 

 

 

 

 

 

Bytes

 

CY8C20x34

up to

0

0

28

0

0

3[2]

512

8K

 

28

 

 

 

 

 

 

Bytes

 

4.4 CyPros Consultants

Certified PSoC Consultants offer everything from technical assistance to completed PSoC designs. To contact or become a PSoC Consultant go to www.cypress.com/cypros.

4.5 Solutions Library

Visit our growing library of solution focused designs at www.cypress.com/solutions. Here you can find various appli- cation designs that include firmware and hardware design files that enable you to complete your designs quickly.

4.6 Technical Support

For assistance with technical issues, search KnowledgeBase articles and forums at www.cypress.com/support. If you cannot find an answer to your question, call technical support at 1-800-541-4736.

Document Number: 38-12018 Rev. *M

Page 4 of 47

[+] Feedback

Image 4
Contents Features Logic Block DiagramCypress Semiconductor Corporation 198 Champion Court O C C O R EDigital System PSoC Functional OverviewPSoC Core Analog System Analog Multiplexer SystemCyPros Consultants Solutions Library Technical Support PSoC Device CharacteristicsGetting Started Additional System ResourcesPSoC Designer Software Subsystems Development ToolsIn-Circuit Emulator Configure Components Designing with PSoC DesignerOrganize and Connect Select ComponentsDocument Conventions Acronyms UsedUnits of Measure Numeric NamingPin Information 56-Pin Part PinoutPin Part Pinout QFN2 56-Pin Part Pinout with XresPin Type Name 68-Pin Part Pinout Pin Type Name Description Digital Analog68-Pin Part Pinout On-Chip Debug Pin Part Pinout QFN100-Ball Vfbga Part Pinout Ball Part Pinout VfbgaPin Name Description Pin100-Ball Vfbga Part Pinout On-Chip Debug CY8C24094 OCD Not for ProductionVss Ground connection D10 Pin Part Pinout Tqfp 100-Pin Part Pinout On-Chip DebugPin Digital Analog Name Description Tqfp Register Reference Register ConventionsRegister Mapping Tables Convention DescriptionName Addr 0,Hex Access Register Map Bank 0 Table User SpaceAccess Name Register Map Bank 1 Table Configuration SpaceAccess Name Addr 1,Hex Electrical Specifications Units of Measure Symbol Unit of MeasureOperating Temperature Absolute Maximum Ratings Symbol Description Min Typ UnitsOperating Temperature Symbol Description Min Typ Max Units Absolute Maximum RatingsDC Chip Level Specifications DC Electrical CharacteristicsDC General Purpose I/O Specifications DC Full-Speed USB Specifications DC Operational Amplifier SpecificationsDC Low Power Comparator Specifications PsrroaTcvoso DC Analog Output Buffer SpecificationsPsrrob DC Analog Reference Specifications DC Analog PSoC Block Specifications Capacitor Unit Value Switched CapacitorDC POR and LVD Specifications VM20 = 111bDC Programming Specifications AC Electrical Characteristics AC Chip-Level SpecificationsAC General Purpose I/O Specifications AC Full-Speed USB SpecificationsAC Operational Amplifier Specifications BwoaTypical Agnd Noise with P24 Bypass AC Low Power Comparator Specifications AC Digital Block SpecificationsAC External Clock Specifications AC Analog Output Buffer SpecificationsAC Programming Specifications AC I2C Specifications Definition for Timing for Fast/Standard Mode on the I2C BusPackaging Dimensions Pin 8x8 mm QFNPin 8x8 mm x 0.89 mm QFN Important NoteBall 6x6 mm Vfbga Solder Reflow Peak Temperature Thermal ImpedanceThermal Impedance for the Package Typical θJA VfbgaSoftware Development Tool SelectionEvaluation Tools Accessories Emulation and Programming Emulation and Programming AccessoriesDevice Programmers Pin Package Flex-Pod Kit18 Foot Kit19 Adapter20Ordering Information VFBGA21Ordering Code Definitions Document History Worldwide Sales and Design Support Products PSoC Solutions Sales, Solutions, and Legal InformationUSB

CY8C24094, CY8C24894, CY8C24994 specifications

The Cypress CY8C24994, CY8C24894, and CY8C24094 are part of the PSoC (Cypress Semiconductor's Programmable System-on-Chip) family, designed to integrate numerous functions onto a single chip for efficient performance and flexibility in various applications.

One of the key features of these devices is their combination of analog and digital components, allowing designers to create a customized system without the need for extensive external circuitry. Each of these chips incorporates an Arm Cortex-M3 processor core, which provides a powerful 32-bit architecture, enabling efficient execution of 32-bit operations while maintaining low power consumption.

The CY8C24994 is the most advanced in this series, supporting up to 128 GPIO (General Purpose Input/Output) pins, which enhances connectivity options. It features multiple programmable analog blocks, including op-amps, comparators, and DACs (Digital-to-Analog Converters), making it suitable for a variety of sensor interfacing and signal processing applications. Additionally, it supports USB communication, providing further versatility for applications requiring data exchange with a host device.

The CY8C24894 presents a slightly more cost-effective solution with slightly fewer GPIO pins and integrated features. It maintains many of the same core attributes as its counterpart, delivering excellent analog performance and several programmable digital blocks. It is suitable for applications requiring moderate computational capabilities along with flexibility in terms of peripherals and interfaces.

The CY8C24094, while positioned as a more basic option within this lineup, still provides essential functionalities for simpler tasks. With fewer pins and capabilities, it is ideal for applications where size and cost are more critical than extensive processing power.

All three devices utilize Cypress's proprietary CapSense technology, enabling touch-sensing capabilities without the need for mechanical buttons. This feature not only enhances user interaction but also contributes to the overall design's robustness and longevity.

In summary, the CY8C24994, CY8C24894, and CY8C24094 PSoC chips offer ample design flexibility with integrated analog and digital functionality, making them an excellent choice for developers aiming to create innovative embedded solutions across a wide range of applications, from consumer electronics to industrial control systems.